World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0001127298
Reproduction Date:

Title: Haccp  
Author: World Heritage Encyclopedia
Language: English
Subject: Food, Hygiene, Jack in the Box, Risk assessment, Foodborne illness, Food processing, Agricore United, American Society for Quality, Failure mode and effects analysis, Cattle feeding
Publisher: World Heritage Encyclopedia


Food safety
Foodborne illness
Hazard analysis and critical control points (HACCP)
Critical control point
Critical factors
Food, acidity, time, temperature, oxygen and moisture
Water activity (aw)
Clostridium botulinum
E. coli
Hepatitis A
Parasitic infections

Hazard analysis and critical control points, or HACCP /ˈhæsʌp/, is a systematic preventive approach to food safety and biological, chemical, and physical hazards in production processes that can cause the finished product to be unsafe, and designs measurements to reduce these risks to a safe level. In this manner, HACCP is referred as the prevention of hazards rather than finished product inspection. The HACCP system can be used at all stages of a food chain, from food production and preparation processes including packaging, distribution, etc. The Food and Drug Administration (FDA) and the United States Department of Agriculture (USDA) say that their mandatory HACCP programs for juice and meat are an effective approach to food safety and protecting public health. Meat HACCP systems are regulated by the USDA, while seafood and juice are regulated by the FDA. The use of HACCP is currently voluntary in other food industries.

HACCP is believed to stem from a production process monitoring used during World War II because traditional "end of the pipe" testing on artillery shell's firing mechanisms could not be performed, and a large percent of the artillery shells made at the time were either duds or misfiring.[1] HACCP itself was conceived in the 1960s when the US National Aeronautics and Space Administration (NASA) asked Pillsbury to design and manufacture the first foods for space flights. Since then, HACCP has been recognized internationally as a logical tool for adapting traditional inspection methods to a modern, science-based, food safety system. Based on risk-assessment, HACCP plans allow both industry and government to allocate their resources efficiently in establishing and auditing safe food production practices. In 1994, the organization of International HACCP Alliance was established initially for the US meat and poultry industries to assist them with implementing HACCP and now its membership has been spread over other professional/industrial areas.[2]

Hence, HACCP has been increasingly applied to industries other than food, such as cosmetics and pharmaceuticals. This method, which in effect seeks to plan out unsafe practices based on science, differs from traditional "produce and sort" quality control methods that do nothing to prevent hazards from occurring and must identify them at the end of the process. HACCP is focused only on the health safety issues of a product and not the quality of the product, yet HACCP principles are the basis of most food quality and safety assurance systems,and the United States, HACCP compliance is regulated by 21 CFR part 120 and 123. Similarly, FAO/WHO published a guideline for all governments to handle the issue in small and less developed food businesses.[3]

HACCP and Water Quality Management The use of HACCP for water quality management was first proposed nearly 20 years ago (Havelaar, A.H. HACCP and Drinking Water Supply. Food Control, Volume 5, Number 3. 1994). Thereafter, a number of water quality initiatives applied HACCP principles and steps to the control of infectious disease from water, and provided the basis for the Water Safety Plan (WSP) approach in the third edition of the World Health Organization (WHO) Guidelines for Drinking-water Quality, (2004), which has been described as “a way of adapting the HACCP approach to drinking water systems” (Rosén, L. et al. Generic Framework and Methods for Integrated Risk Management in Water Safety Plans. Techneau, June 2007). The WHO HACCP-based framework, in particular the WSP, has been successfully applied to assessing and managing the risks posed by Legionella in building water systems. (Legionella and the prevention of legionellosis. J. Bartram, et al., Editors, WHO Press, 2007).


In the early 1960s, a collaborated effort between the Pillsbury Company, NASA, and the U.S. Army Laboratories began with the objective to provide safe food for space expeditions. People involved in this collaboration included Herbert Hollander, Mary Klicka, and Hamed El-Bisi of the United States Army Laboratories in Natick, Massachusetts, Dr. Paul A. Lachance of the Manned Spacecraft Center in Houston, Texas[4] and Howard E. Baumann representing the Pillsbury as its lead scientist.[4]

In order to insure that the food that would be sent to space was safe, Lachance imposed strict microbial requirements, including pathogen limits (including E. coli, Salmonella, and Clostridium botulinum).[4] Using the traditional end product testing method, it was soon realized that almost all of the food manufactured was being used on testing and very little was left for actual use. It was realized that a new approach was needed.

NASA's own requirements for Critical Control Points (CCP) in engineering management would be used as a guide for food safety.[4] CCP derived from Failure mode and effects analysis (FMEA) from NASA via the munitions industry to test weapon and engineering system reliability.[4] Using that information, NASA and Pillsbury required contractors to identify "critical failure areas" and eliminate them from the system, a first in the food industry then.[4] Baumann, a microbiologist by training, was so pleased with Pillsbury's experience in the space program that he advocated for his company to adopt what would become HACCP at Pillsbury.[4]

Soon thereafter, Pillsbury was confronted with a food safety issue of its own when glass contamination was found in farina, a cereal commonly used in infant food.[4] Baumann's leadership promoted HACCP in Pillsbury for producing commercial foods, and applied to its own food production.[4] This led to a panel discussion at the 1971 National Conference on Food Protection that included examining CCPs and Good Manufacturing Practices in producing safe foods.[4] Several botulism cases were attributed to under-processed low-acid canned foods in 1970-71. The United States Food and Drug Administration (FDA) asked Pillsbury to organize and conduct a training program on the inspection of canned foods for FDA inspectors.[4] This 21 day program was first held in September 1972 with 11 days of classroom lecture and 10 days of canning plant evaluations.[4] Canned food regulations (21 CFR 108, 21 CFR 110, 21 CFR 113, and 21 CFR 114)[5] were first published in 1969.[4] Pillsbury's training program to the FDA in 1969, titled "Food Safety through the Hazard Analysis and Critical Control Point System", was the first time that HACCP was used.[4]

HACCP was initially set on three principles, now shown as principles one, two, and four in the section below.[4] Pillsbury quickly adopted two more principles, numbers three and five, to its own company in 1975.[4] It was further supported by the National Academy of Sciences (NAS) that governmental inspections by the FDA go from reviewing plant records to compliance with its HACCP system.[4] A second proposal by the NAS led to the development of the National Advisory Committee on Microbiological Criteria for Foods (NACMCF) in 1987.[4] NACMCF was initially responsible for defining HACCP's systems and guidelines for its application and were coordinated with the Codex Committee for Food Hygiene, that led to reports starting in 1992 and further harmonization in 1997.[4] By 1997, the seven HACCP principles listed below became the standard.[4] A year earlier, the American Society for Quality offered their first certifications for HACCP Auditors.[6] (First known as Certified Quality Auditor-HACCP, they were changed to Certified HACCP Auditor (CHA) in 2004.[7]

HACCP expanded in all realms of the food industry, going into meat, poultry, seafood, dairy, and has spread now from the farm to the fork.[4]

The HACCP seven principles

Principle 1: Conduct a hazard analysis. – Plans determine the food safety hazards and identify the preventive measures the plan can apply to control these hazards. A food safety hazard is any biological, chemical, or physical property that may cause a food to be unsafe for human consumption.

Principle 2: Identify critical control points. – A critical control point (CCP) is a point, step, or procedure in a food manufacturing process at which control can be applied and, as a result, a food safety hazard can be prevented, eliminated, or reduced to an acceptable level.

Principle 3: Establish critical limits for each critical control point. – A critical limit is the maximum or minimum value to which a physical, biological, or chemical hazard must be controlled at a critical control point to prevent, eliminate, or reduce to an acceptable level.

Principle 4: Establish critical control point monitoring requirements. – Monitoring activities are necessary to ensure that the process is under control at each critical control point. In the United States, the FSIS is requiring that each monitoring procedure and its frequency be listed in the HACCP plan.

Principle 5: Establish corrective actions. - These are actions to be taken when monitoring indicates a deviation from an established critical limit. The final rule requires a plant's HACCP plan to identify the corrective actions to be taken if a critical limit is not met. Corrective actions are intended to ensure that no product injurious to health or otherwise adulterated as a result of the deviation enters commerce.

Principle 6: Establish procedures for ensuring the HACCP system is working as intended. – Validation ensures that the plants do what they were designed to do; that is, they are successful in ensuring the production of a safe product. Plants will be required to validate their own HACCP plans. FSIS will not approve HACCP plans in advance, but will review them for conformance with the final rule.

Verification ensures the HACCP plan is adequate, that is, working as intended. Verification procedures may include such activities as review of HACCP plans, CCP records, critical limits and microbial sampling and analysis. FSIS is requiring that the HACCP plan include verification tasks to be performed by plant personnel. Verification tasks would also be performed by FSIS inspectors. Both FSIS and industry will undertake microbial testing as one of several verification activities.

Verification also includes 'validation' – the process of finding evidence for the accuracy of the HACCP system (e.g. scientific evidence for critical limitations).

Principle 7: Establish record keeping procedures. – The HACCP regulation requires that all plants maintain certain documents, including its hazard analysis and written HACCP plan, and records documenting the monitoring of critical control points, critical limits, verification activities, and the handling of processing deviations.


The seven HACCP principles are included in the international standard ISO 22000 FSMS 2005. This standard is a complete food safety and quality [8] management system incorporating the elements of prerequisite programmes(GMP & SSOP),[8] HACCP and the quality management system, which together form an organization's Total Quality Management system.

HACCP training

Training for developing and implementing HACCP Food Safety management system are offered by several quality assurance companies.[9][10][11] However, ASQ does provide a Trained HACCP Auditor (CHA) exam to individuals seeking professional training.[12] In the UK the Chartered Institute of Environmental Health (CIEH)[13] offers a HACCP for Food Manufacturing qualification. accredited by the QCA (Qualifications and Curriculum Authority).[14]

HACCP application

Applied range

It can apply to several food categories; sea food, bulk milk production line, Bulk Cream and Butter Production Line, animal meat industry, Organic Chemical Contaminants in Food, Corn Curl Manufacturing Plant, etc.


  • Fish and fishery products[15]
  • Fresh-cut produce[16]
  • Juice and nectary products[17]
  • Food outlets[18]
  • Meat and poultry products[19]
  • School food and services[20]

HACCP Implementation

It involves monitoring, verifying and validating of the daily work that is compliant with regulatory requirements in all stages all the time. The differences among those three types of work are given by Saskatchewan Agriculture and Food.[21]

HACCP versus ISO 22000

ISO 22000 is a standard designed to help augment HACCP on issues related to food safety. Although several companies, especially the big ones, have either implemented or are on the point of implementing ISO 22000, there are many others which are hesitant to adopt it. The main reason behind that is the lack of information and the fear that the new standard is too demanding in terms of bureaucratic work, from abstract of case study.[22]

See also


External links

  • International HACCP Alliance
  • FSIS guidances for meat and poultry products
  • Canadian Food Inspection Agency Contains free templates and guides for HACCP programs to meet Canadian Food and Drug Regulations for the public but targeting federally registered establishments.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.