An ellipse obtained as the intersection of a
cone with an inclined plane.
In mathematics, an ellipse is a curve on a plane surrounding two focal points such that the sum of the distances to the two focal points is constant for every point on the curve. As such, it is a generalization of a circle, which is a special type of an ellipse that has both focal points at the same location. The shape of an ellipse (how 'elongated' it is) is represented by its eccentricity, which for an ellipse can be any number from 0 (the limiting case of a circle) to arbitrarily close to but less than 1.
Ellipses are the closed type of conic section: a plane curve that results from the intersection of a cone by a plane. (See figure to the right.) Ellipses have many similarities with the other two forms of conic sections: the parabolas and the hyperbolas, both of which are open and unbounded. The cross section of a cylinder is an ellipse, unless the section is parallel to the axis of the cylinder.
Analytically, an ellipse can also be defined as the set of points such that the ratio of the distance of each point on the curve from a given point (called a focus or focal point) to the distance from that same point on the curve to a given line (called the directrix) is a constant, called the eccentricity of the ellipse.
Ellipses are common in physics, astronomy and engineering. For example, the orbit of each planet in the solar system is an ellipse with the barycenter of the planetSun pair at one of the focal points. The same is true for moons orbiting planets and all other systems having two astronomical bodies. The shape of planets and stars are often well described by ellipsoids. Ellipses also arise as images of a circle under parallel projection and the bounded cases of perspective projection, which are simply intersections of the projective cone with the plane of projection. It is also the simplest Lissajous figure, formed when the horizontal and vertical motions are sinusoids with the same frequency. A similar effect leads to elliptical polarization of light in optics.
The name, ἔλλειψις (élleipsis, "omission"), was given by Apollonius of Perga in his Conics, emphasizing the connection of the curve with "application of areas".
Contents

Elements of an ellipse 1

Drawing ellipses 2

Pinsandstring method 2.1

Trammel method 2.2

Parallelogram method 2.3

Mathematical definitions and properties 3

In Euclidean geometry 3.1

Definition 3.1.1

Equations 3.1.2

Focus 3.1.3

Eccentricity 3.1.4

Directrix 3.1.5

Circular directrix 3.1.6

Ellipse as hypotrochoid 3.1.7

Area 3.1.8

Circumference 3.1.9

Chords 3.1.10

Latus rectum 3.1.10.1

Curvature 3.1.10.2

Projective geometry 3.2

In analytic geometry 3.3

General ellipse 3.3.1

Canonical form 3.3.2

Line segment as a type of degenerate ellipse 3.3.3

In trigonometry 3.4

General parametric form 3.4.1

Parametric form in canonical position 3.4.2

Polar form relative to center 3.4.3

Reflexive property 3.4.4

Polar form relative to focus 3.4.5

General polar form 3.4.6

Angular eccentricity 3.4.7

Degrees of freedom 3.5

Applications 4

Ellipses in physics 4.1

Elliptical reflectors and acoustics 4.1.1

Planetary orbits 4.1.2

Harmonic oscillators 4.1.3

Phase visualization 4.1.4

Elliptical gears 4.1.5

Optics 4.1.6

Ellipses in statistics and finance 4.2

Ellipses in computer graphics 4.3

Drawing with Bézier paths 4.3.1

Drawing with three points of a parallelogram 4.3.2

Ellipses in optimization theory 4.4

See also 5

Notes 6

References 7

External links 8
Elements of an ellipse
The ellipse and some of its mathematical properties.
The distance traveled from one focus to another, via some point on the ellipse, is the same regardless of the point selected.
Ellipses have two perpendicular axes about which the ellipse is symmetric. These axes intersect at the center of the ellipse due to this symmetry. The larger of these two axes, which corresponds to the largest distance between antipodal points on the ellipse, is called the major axis. (On the figure to the right it is represented by the line segment between the point labeled −a and the point labeled a.) The smaller of these two axes, and the smallest distance across the ellipse, is called the minor axis.^{[1]} (On the figure to the right it is represented by the line segment between the point labeled −b to the point labeled b.)
The semimajor axis (denoted by a in the figure) and the semiminor axis (denoted by b in the figure) are one half of the major and minor axes, respectively. These are sometimes called (especially in technical fields) the major and minor semiaxes,^{[2]}^{[3]} the major and minor semiaxes,^{[4]}^{[5]} or major radius and minor radius.^{[6]}^{[7]}^{[8]}^{[9]}
The four points where these axes cross the ellipse are the vertices and are marked as a, −a, b, and −b. In addition to being at the largest and smallest distance from the center, these points are where the curvature of the ellipse is maximum and minimum.^{[10]}
The two foci (the term focal points is also used) of an ellipse are two special points F_{1} and F_{2} on the ellipse's major axis that are equidistant from the center point. The sum of the distances from any point P on the ellipse to those two foci is constant and equal to the major axis (PF_{1} + PF_{2} = 2a). (On the figure to the right this corresponds to the sum of the two green lines equaling the length of the major axis that goes from −a to a.)
The distance to the focal point from the center of the ellipse is sometimes called the linear eccentricity, f, of the ellipse. Here it is denoted by f, but it is often denoted by c. Due to the Pythagorean theorem and the definition of the ellipse explained in the previous paragraph: f^{2} = a^{2} −b^{2}.
A second equivalent method of constructing an ellipse using a directrix is shown on the plot as the three blue lines. (See the Directrix section of this article for more information about this method). The dashed blue line is the directrix of the ellipse shown.
The eccentricity of an ellipse, usually denoted by ε or e, is the ratio of the distance between the two foci, to the length of the major axis or e = 2f/2a = f/a. For an ellipse the eccentricity is between 0 and 1 (0 < e < 1). When the eccentricity is 0 the foci coincide with the center point and the figure is a circle. As the eccentricity tends toward 1, the ellipse gets a more elongated shape. It tends towards a line segment (see below) if the two foci remain a finite distance apart and a parabola if one focus is kept fixed as the other is allowed to move arbitrarily far away. The eccentricity is also equal to the ratio of the distance (such as the (blue) line PF_{2}) from any particular point on an ellipse to one of the foci to the perpendicular distance to the directrix from the same point (line PD), e = PF_{2}/PD.
Drawing ellipses
Drawing an ellipse with two pins, a loop, and a pen
Ellipse construction applying the parallelogram method
Pinsandstring method
The characterization of an ellipse as the locus of points so that sum of the distances to the foci is constant leads to a method of drawing one using two drawing pins, a length of string, and a pencil.^{[11]} In this method, pins are pushed into the paper at two points which will become the ellipse's foci. A string tied at each end to the two pins and the tip of a pen is used to pull the loop taut so as to form a triangle. The tip of the pen will then trace an ellipse if it is moved while keeping the string taut. Using two pegs and a rope, this procedure is traditionally used by gardeners to outline an elliptical flower bed; thus it is called the gardener's ellipse.^{[12]}
Trammel method
An ellipse can also be drawn using a ruler, a set square, and a pencil:

Draw two perpendicular lines M,N on the paper; these will be the major (M) and minor (N) axes of the ellipse. Mark three points A, B, C on the ruler. A>C being the length of the semimajor axis and B>C the length of the semiminor axis. With one hand, move the ruler on the paper, turning and sliding it so as to keep point A always on line N, and B on line M. With the other hand, keep the pencil's tip on the paper, following point C of the ruler. The tip will trace out an ellipse.
The trammel of Archimedes, or ellipsograph, is a mechanical device that implements this principle. The ruler is replaced by a rod with a pencil holder (point C) at one end, and two adjustable side pins (points A and B) that slide into two perpendicular slots cut into a metal plate.^{[13]} The mechanism can be used with a router to cut ellipses from board material. The mechanism is also used in a toy called the "nothing grinder".
Parallelogram method
In the parallelogram method, an ellipse is constructed point by point using equally spaced points on two horizontal lines and equally spaced points on two vertical lines. It is based on Steiner's theorem on the generation of conic sections. Similar methods exist for the parabola and hyperbola.
Mathematical definitions and properties
In Euclidean geometry
Definition
In Euclidean geometry, the ellipse is usually defined as the bounded case of a conic section, or as the set of points such that the sum of the distances to two fixed points (the foci) is constant. The ellipse can also be defined as the set of points such that the distance from any point in that set to a given point in the plane (a focus) is a constant positive fraction less than 1 (the eccentricity) of the perpendicular distance of the point in the set to a given line (called the directrix). Yet another equivalent definition of the ellipse is that it is the set of points that are equidistant from one point in the plane (a focus) and a particular circle, the directrix circle (whose center is the other focus).
The equivalence of these definitions can be proved using the Dandelin spheres.
Equations
The equation of an ellipse whose major and minor axes coincide with the Cartesian axes is \displaystyle{\left(\frac{x}{a}\right)^2 + \left(\frac{y}{b}\right)^2} = 1. This can be explained as follows:
If we let

{x} = {a}\cos\theta.
And

{y} = {b}\sin\theta.
Then plotting x and y values for all angles of θ between 0 and 2π results in an ellipse (e.g. at θ = 0, x = a, y = 0 and at θ = π/2, y = b, x = 0).
Squaring both equations gives:

{x}^2 = {a}^2\cos^2\theta.
And

{y}^2 = {b}^2\sin^2\theta.
Dividing these two equations by a^{2} and b^{2} respectively gives:

\frac =\sqrt{1\left(\frac{b}{a}\right)^2} =f/a
(where again a and b are onehalf of the ellipse's major and minor axes respectively, and f is the focal distance) or, as expressed in terms using the flattening factor g=1\frac {b}{a}=1\sqrt{1e^2},

e=\sqrt{g(2g)}.
Other formulas for the eccentricity of an ellipse are listed in the article on eccentricity of conic sections. Formulas for the eccentricity of an ellipse that is expressed in the more general quadratic form are described in the article dedicated to conic sections.
Directrix
Each focus F of the ellipse is associated with a line parallel to the minor axis called a directrix. Refer to the illustration on the right, in which the ellipse is centered at the origin. The distance from any point P on the ellipse to the focus F is a constant fraction of that point's perpendicular distance to the directrix, resulting in the equality e = PF/PD. The ratio of these two distances is the eccentricity of the ellipse. This property (which can be proved using the Dandelin spheres) can be taken as another definition of the ellipse.
Besides the wellknown ratio e = f/a, where f is the distance from the center to the focus and a is the distance from the center to the farthest vertices (most sharply curved points of the ellipse), it is also true that e = a/d, where d is the distance from the center to the directrix.
Circular directrix
The ellipse can also be defined as the set of points that are equidistant from one focus and a circle, the directrix circle, that is centered on the other focus. The radius of the directrix circle equals the ellipse's major axis, so the focus and the entire ellipse are inside the directrix circle.
Ellipse as hypotrochoid
An ellipse (in red) as a special case of the
hypotrochoid with
R = 2
r.
The ellipse is a special case of the hypotrochoid when R = 2r.
Area
The area A_\text{ellipse} enclosed by an ellipse is:

A_\text{ellipse} = \pi a b
where a and b are the semimajor and semiminor axes (^{1}⁄_{2} of the ellipse's major and minor axes), respectively.
An ellipse defined implicitly by A x^2+ B x y + C y^2 = 1 has area \frac{2\pi}{\sqrt{ 4 A C  B^2 }}.
The area formula πab is intuitive: start with a circle of radius b (so its area is πb^{2}) and stretch it by a factor a/b to make an ellipse. This intuitively justifies the area by the same factor: πb^{2}(a/b) = πab. However, a more rigorous proof requires integration as follows:
For the ellipse in standard form, \frac{x^2}{a^2}+\frac{y^2}{b^2}=1, and hence y=\pm \sqrt{\frac{a^2b^2b^2x^2}{a^2}}, with horizontal intercepts at ± a, the area A_\text{ellipse} can be computed as twice the integral of the positive square root:

\begin{align} A_\text{ellipse} &= \int_{a}^a 2b\sqrt{1x^2/a^2}\,dx\\ &= \frac ba \int_{a}^a 2\sqrt{a^2x^2}\,dx. \end{align}
The second integral is the area of a circle of radius a, i.e., \pi a^2; thus we have:

A_\text{ellipse} = \frac{b}{a}A_\text{circle} = \pi ab.
The area formula can also be proven in terms of polar coordinates using the coordinate transformation \bold{T}(r,\theta) = ( ra \cos\theta , rb \sin\theta ).
Any point inside the ellipse with xintercept a and yintercept b can be defined in terms of r and \theta, where 0 \leqslant r \leqslant 1 and 0 \leqslant \theta \leqslant 2\pi .
To define the area differential in such coordinates we use the Jacobian matrix of the coordinate transformation times dr\,d\theta:

\begin{align} dA_\text{ellipse} &= \det \begin{pmatrix} \frac{\partial \bold{T}}{\partial r} & \frac{\partial \bold{T}}{\partial \theta}\\ \end{pmatrix} \,dr\,d\theta \\ &= \det \begin{pmatrix} a\cos\theta & ra\sin\theta \\ b\sin\theta & rb\cos\theta \end{pmatrix} \,dr\,d\theta \\ &= abr\,dr\,d\theta. \end{align}
We now integrate over the ellipse to find the area:

A_\text{ellipse} = \iint_\text{ellipse} dA_\text{ellipse} = \iint_\text{ellipse} abr\,dr\,d\theta = ab \int_{0}^{2\pi} \int_{0}^{1}r\,dr\,d\theta = ab\pi.
Circumference
The circumference C of an ellipse is:

C = 4 a E(e)
where again a is the length of the semimajor axis and e is the eccentricity and where the function E is the complete elliptic integral of the second kind (the arc length of an ellipse, in general, has no closedform solution in terms of elementary functions and the elliptic integrals were motivated by this problem). This may be evaluated directly using the Carlson symmetric form.^{[14]} This gives a succinct and rapidly converging method for evaluating the circumference.^{[15]}
The exact infinite series is:

C = 2\pi a \left{2n  1}\right],
where n!! is the double factorial. Unfortunately, this series converges rather slowly; however, by expanding in terms of h = (ab)^2/(a+b)^2 , Ivory^{[16]} and Bessel^{[17]} derived an expression which converges much more rapidly,

C = \pi (a + b) \left[1 + \sum_{n=1}^\infty \left(\frac{(2n  1)!!}{2^n n!}\right)^2 \frac{h^n}{(2n  1)^2}\right].
Ramanujan gives two good approximations for the circumference in §16 of;^{[18]} they are

C \approx \pi \left[3(a+b)  \sqrt{(3a+b)(a+3b)}\right]= \pi \left[3(a+b)\sqrt{10ab+3(a^2+b^2)}\right]
and

C\approx\pi\left(a+b\right)\left(1+\frac{3h}{10+\sqrt{43h}}\right).
The errors in these approximations, which were "obtained empirically", are of order h^3 and h^5, respectively.
More generally, the arc length of a portion of the circumference, as a function of the angle subtended, is given by an incomplete elliptic integral.
The inverse function, the angle subtended as a function of the arc length, is given by the elliptic functions.
Some lower and upper bounds on the circumference of the canonical ellipse \tfrac{x^2}{a^2}+\tfrac{y^2}{b^2}=1 with a ≥b are^{[19]}

C\le 2\pi a,

\pi (a+b)\le C\le 4(a+b),

4\sqrt{a^2+b^2}\le C\le \sqrt{2} \pi \sqrt{a^2+b^2},

C\le 4(ab)+2\pi .
Here the upper bound 2\pi a is the circumference of a circumscribed concentric circle passing through the endpoints of the ellipse's major axis, and the lower bound 4\sqrt{a^2+b^2} is the perimeter of an inscribed rhombus with vertices at the endpoints of the major and minor axes.
Chords
The midpoints of a set of parallel chords of an ellipse are collinear.^{[20]}^{:p.147}
Latus rectum
The chords of an ellipse which are perpendicular to the major axis and pass through one of its foci are called the latera recta of the ellipse. The length of each latus rectum is 2b^{2}/a.
Curvature
The curvature is given by \kappa = \frac{1}{a^{2}b^{2}}\left(\frac{x^{2}}{a^{4}}+\frac{y^{2}}{b^{4}}\right)^{\frac{3}{2}}. A local normal to the ellipse bisects the angle \angle F_1 P F_2 shown in the figure above. This is evident graphically in the parallelogram method of construction, and can be proven analytically, for example by using the parametric form in canonical position, as given below.
Projective geometry
In a projective geometry defined over a field, a conic section can be defined as the set of all points of intersection between corresponding lines of two pencils of lines in a plane which are related by a projective, but not perspective, map (see Steiner's theorem). By projective duality, a conic section can also be defined as the envelope of all lines that connect corresponding points of two lines which are related by a projective, but not perspective, map.
In a pappian projective plane (one defined over a field), all conic sections are equivalent to each other, and the different types of conic sections are determined by how they intersect the line at infinity, denoted by Ω. An ellipse is a conic section which does not intersect this line. A parabola is a conic section that is tangent to Ω, and a hyperbola is one that crosses Ω twice.^{[21]} Since an ellipse does not intersect the line at infinity, it properly belongs to the affine plane determined by removing the line at infinity and all of its points from the projective plane.
Affine space
An ellipse is also the result of projecting a circle, sphere, or ellipse in a three dimensional affine space onto a plane (flat), by parallel lines. This is a special case of conical (perspective) projection of any of those geometric objects in the affine space from a point O onto a plane P, when the point O lies in the plane at infinity of the affine space. In the setting of pappian projective planes, the image of an ellipse by any affine map (a projective map which leaves the line at infinity invariant) is an ellipse, and, more generally, the image of an ellipse by any projective map M such that the line M^{−1}(Ω) does not touch or cross the ellipse is an ellipse.
In analytic geometry
General ellipse
In analytic geometry, the ellipse is defined as the set of points (X,Y) of the Cartesian plane that, in nondegenerate cases, satisfy the implicit equation^{[22]}^{[23]}

~A X^2 + B X Y + C Y^2 + D X + E Y + F = 0
provided B^2  4AC < 0.
To distinguish the degenerate cases from the nondegenerate case, let ∆ be the determinant

\begin{vmatrix} A & B/2 & D/2\\B/2 & C & E/2\\D/2 & E/2 & F \end{vmatrix}
that is,

\Delta = \left( AC  \frac{B^2}{4} \right) F + \frac{BED}{4}  \frac{CD^2}{4}  \frac{AE^2}{4}
Then the ellipse is a nondegenerate real ellipse if and only if C∆ < 0. If C∆ > 0, we have an imaginary ellipse, and if ∆ = 0, we have a point ellipse.^{[24]}^{:p.63}
The general equation's coefficients can be obtained from known semimajor axis a, semiminor axis b, center coordinates (x_c, y_c) and rotation angle \Theta using the following formulae:

\begin{align}A &= a^2 (\sin\Theta)^2 + b^2 (\cos\Theta)^2\\ B &= 2 (b^2a^2) \sin\Theta \cos\Theta\\ C &= a^2 (\cos\Theta)^2 + b^2 (\sin\Theta)^2\\ D &= 2 A x_c  B y_c\\ E &= B x_c  2 C y_c\\ F &= A x_c^2 + B x_c y_c + C y_c^2  a^2 b^2\end{align}
These expressions can be derived from the canonical equation (see next section) by substituting the coordinates with expressions for rotation and translation of the coordinate system:

\frac{x_{can}^2}{a^2} + \frac{y_{can}^2}{b^2} = 1

x_{can} = (xx_c) \cos\Theta + (yy_c) \sin\Theta

y_{can} = (xx_c) \sin\Theta + (yy_c) \cos\Theta
Canonical form
Let a>b. Through change of coordinates (a rotation of axes and a translation of axes) the general ellipse can be described by the canonical implicit equation

\frac{x^2}{a^2}+\frac{y^2}{b^2}=1
Here (x,y) are the point coordinates in the canonical system, whose origin is the center (X_c,Y_c) of the ellipse, whose xaxis is the unit vector (X_a,Y_a) coinciding with the major axis, and whose yaxis is the perpendicular vector (Y_a,X_a) coinciding with the minor axis. That is, x = X_a(X  X_c) + Y_a(Y  Y_c) and y = Y_a(X  X_c) + X_a(Y  Y_c).
In this system, the center is the origin (0,0) and the foci are (e a, 0) and (+e a, 0).
Any ellipse can be obtained by rotation and translation of a canonical ellipse with the proper semidiameters. The expression of an ellipse centered at (X_c,Y_c) is

\frac{(x  X_c)^2}{a^2}+\frac{(y  Y_c)^2}{b^2}=1
Moreover, any canonical ellipse can be obtained by scaling the unit circle of \reals^2, defined by the equation

X^2+Y^2=1\,
by factors a and b along the two axes.
For an ellipse in canonical form, we have

Y = \pm b\sqrt{1  (X/a)^2} = \pm \sqrt{(a^2X^2)(1  e^2)}
The distances from a point (X,Y) on the ellipse to the left and right foci are a + e X and a  e X, respectively.
Line segment as a type of degenerate ellipse
A line segment is a degenerate ellipse with semiminor axis = 0 and eccentricity = 1, and with the focal points at the ends.^{[25]} Although the eccentricity is 1 this is not a parabola. A radial elliptic trajectory is a nontrivial special case of an elliptic orbit, where the ellipse is a line segment.
In trigonometry
General parametric form
An ellipse in general position can be expressed parametrically as the path of a point (X(t),Y(t)), where

X(t)=X_c + a\,\cos t\,\cos \varphi  b\,\sin t\,\sin\varphi

Y(t)=Y_c + a\,\cos t\,\sin \varphi + b\,\sin t\,\cos\varphi
as the parameter t varies from 0 to 2π. Here (X_c,Y_c) is the center of the ellipse, and \varphi is the angle between the Xaxis and the major axis of the ellipse.
Parametric form in canonical position
Parametric equation for the ellipse (red) in canonical position. The eccentric anomaly t is the angle of the blue line with the Xaxis.
For an ellipse in canonical position (center at origin, major axis along the Xaxis), the equation simplifies to

X(t)=a\,\cos t

Y(t)=b\,\sin t
Note that the parameter t (called the eccentric anomaly in astronomy) is not the angle of (X(t),Y(t)) with the Xaxis.
For a given point on an ellipse, formulae connecting the tangential angle \phi, the polar angle from the ellipse center \theta, and the parametric angle t^{[26]} are:^{[27]}^{[28]}^{[29]}^{[30]}

\cot\phi = \frac{a}{b} \tan t = \frac{\tan \theta}{(1  g)^2} = \frac{\tan \theta}{1  e^2},

\tan t = \frac{b}{a} \cot\phi = \sqrt{(1  e^2)} \cot\phi = (1  g) \cot\phi = \frac{\tan\theta}{\sqrt{(1  e^2)}} = \frac{a}{b} \tan\theta.
Polar form relative to center
Polar coordinates centered at the center.
In polar coordinates, with the origin at the center of the ellipse and with the angular coordinate \theta measured from the major axis, the ellipse's equation is

r(\theta)=\frac{ab}{\sqrt{(b \cos \theta)^2 + (a\sin \theta)^2}}
Reflexive property
When a ray of light originating from one focus reflects off the inner surface of an ellipse, it always passes through the other focus.
Polar form relative to focus
Polar coordinates centered at focus.
If instead we use polar coordinates with the origin at one focus, with the angular coordinate \theta = 0 still measured from the major axis, the ellipse's equation is

r(\theta)=\frac{a (1e^{2})}{1 \pm e\cos\theta}
where the sign in the denominator is negative if the reference direction \theta = 0 points towards the center (as illustrated on the right), and positive if that direction points away from the center.
In the slightly more general case of an ellipse with one focus at the origin and the other focus at angular coordinate \phi, the polar form is

r=\frac{a (1e^{2})}{1  e\cos(\theta  \phi)}.
The angle \theta in these formulas is called the true anomaly of the point. The numerator a (1e^{2}) of these formulas is the semilatus rectum of the ellipse, usually denoted l. It is the distance from a focus of the ellipse to the ellipse itself, measured along a line perpendicular to the major axis.
Semilatus rectum.
General polar form
The following equation on the polar coordinates (r, θ) describes a general ellipse with semidiameters a and b, centered at a point (r_{0}, θ_{0}), with the a axis rotated by φ relative to the polar axis:

r(\theta )=\frac{P(\theta )+Q(\theta )}{R(\theta )}
where r is the radius or central distance, and

P(\theta )=r_0 \left[\left(b^2a^2\right) \cos \left(\theta +\theta _02 \varphi \right)+\left(a^2+b^2\right) \cos \left(\theta \theta_0\right)\right]

Q(\theta )=\sqrt{2} a b \sqrt{R(\theta )2 r_0^2 \sin ^2\left(\theta \theta_0\right)}

R(\theta )=\left(b^2a^2\right) \cos (2 \theta 2 \varphi )+a^2+b^2
Angular eccentricity
The angular eccentricity \alpha is the angle whose sine is the eccentricity e; that is,

\alpha=\sin^{1}(e)=\cos^{1}\left(\frac{b}{a}\right)=2\tan^{1}\left(\sqrt{\frac{ab}{a+b}}\right);\,\!
Degrees of freedom
An ellipse in the plane has five degrees of freedom (the same as a general conic section), defining its vertical and horizontal position, orientation, shape, and scale. In comparison, circles have only three degrees of freedom (horizontal position, vertical position and scale), while parabolae have four. Said another way, the set of all ellipses in the plane, with any natural metric (such as the Hausdorff distance) is a fivedimensional manifold.
The five degrees of freedom can be identified with, for example, the coefficients A,B,C,D,E of the implicit equation, or with the coefficients X_{c}, Y_{c}, φ, a, b of the general parametric form. Thus an ellipse is uniquely determined by any five points lying on it.
Applications
Ellipses in physics
Elliptical reflectors and acoustics
If the water's surface is disturbed at one focus of an elliptical water tank, the circular waves created by that disturbance, after being reflected by the walls, will converge simultaneously to a single point — the second focus. This is a consequence of the total travel length being the same along any wallbouncing path between the two foci.
Similarly, if a light source is placed at one focus of an elliptic mirror, all light rays on the plane of the ellipse are reflected to the second focus. Since no other smooth curve has such a property, it can be used as an alternative definition of an ellipse. (In the special case of a circle with a source at its center all light would be reflected back to the center.) If the ellipse is rotated along its major axis to produce an ellipsoidal mirror (specifically, a prolate spheroid), this property will hold for all rays out of the source. Alternatively, a cylindrical mirror with elliptical crosssection can be used to focus light from a linear fluorescent lamp along a line of the paper; such mirrors are used in some document scanners.
Sound waves are reflected in a similar way, so in a large elliptical room a person standing at one focus can hear a person standing at the other focus remarkably well. The effect is even more evident under a vaulted roof shaped as a section of a prolate spheroid. Such a room is called a whisper chamber. The same effect can be demonstrated with two reflectors shaped like the end caps of such a spheroid, placed facing each other at the proper distance. Examples are the National Statuary Hall at the United States Capitol (where John Quincy Adams is said to have used this property for eavesdropping on political matters); the Mormon Tabernacle at Temple Square in Salt Lake City, Utah; at an exhibit on sound at the Museum of Science and Industry in Chicago; in front of the University of Illinois at UrbanaChampaign Foellinger Auditorium; and also at a side chamber of the Palace of Charles V, in the Alhambra.
Planetary orbits
In the 17th century, Johannes Kepler discovered that the orbits along which the planets travel around the Sun are ellipses with the Sun [approximately] at one focus, in his first law of planetary motion. Later, Isaac Newton explained this as a corollary of his law of universal gravitation.
More generally, in the gravitational twobody problem, if the two bodies are bound to each other (i.e., the total energy is negative), their orbits are similar ellipses with the common barycenter being one of the foci of each ellipse. The other focus of either ellipse has no known physical significance. Interestingly, the orbit of either body in the reference frame of the other is also an ellipse, with the other body at the same focus.
Keplerian elliptical orbits are the result of any radially directed attraction force whose strength is inversely proportional to the square of the distance. Thus, in principle, the motion of two oppositely charged particles in empty space would also be an ellipse. (However, this conclusion ignores losses due to electromagnetic radiation and quantum effects, which become significant when the particles are moving at high speed.)
For elliptical orbits, useful relations involving the eccentricity e are:

\begin{align}e &= \frac{r_{a}r_{p}}{r_{a}+r_{p}}=\frac{r_{a}r_{p}}{2a}\\ r_{a} &= (1+e)a\\ r_{p} &= (1e)a\end{align}
where
Also, in terms of r_{a} and r_{p}, the semimajor axis a is their arithmetic mean, the semiminor axis b is their geometric mean, and the semilatus rectum l is their harmonic mean. In other words,

\begin{align}a &= \frac{r_{a}+r_{p}}{2}\\ b &= \sqrt{r_{a}\cdot r_{p}}\\ l &= \frac{2}{\frac{1}{r_{a}}+\frac{1}{r_{p}}}=\frac{2r_{a}r_{p}}{r_{a}+r_{p}}\end{align}.
Harmonic oscillators
The general solution for a harmonic oscillator in two or more dimensions is also an ellipse. Such is the case, for instance, of a long pendulum that is free to move in two dimensions; of a mass attached to a fixed point by a perfectly elastic spring; or of any object that moves under influence of an attractive force that is directly proportional to its distance from a fixed attractor. Unlike Keplerian orbits, however, these "harmonic orbits" have the center of attraction at the geometric center of the ellipse, and have fairly simple equations of motion.
Phase visualization
In electronics, the relative phase of two sinusoidal signals can be compared by feeding them to the vertical and horizontal inputs of an oscilloscope. If the display is an ellipse, rather than a straight line, the two signals are out of phase.
Elliptical gears
Two noncircular gears with the same elliptical outline, each pivoting around one focus and positioned at the proper angle, will turn smoothly while maintaining contact at all times. Alternatively, they can be connected by a link chain or timing belt, or in the case of a bicycle the main chainring may be elliptical, or an ovoid similar to an ellipse in form. Such elliptical gears may be used in mechanical equipment to produce variable angular speed or torque from a constant rotation of the driving axle, or in the case of a bicycle to allow a varying crank rotation speed with inversely varying mechanical advantage.
Elliptical bicycle gears make it easier for the chain to slide off the cog when changing gears.^{[31]}
An example gear application would be a device that winds thread onto a conical bobbin on a spinning machine. The bobbin would need to wind faster when the thread is near the apex than when it is near the base.^{[32]}
Optics

In a material that is optically anisotropic (birefringent), the refractive index depends on the direction of the light. The dependency can be described by an index ellipsoid. (If the material is optically isotropic, this ellipsoid is a sphere.)

In lamppumped solidstate lasers, elliptical cylindershaped reflectors have been used to direct light from the pump lamp (coaxial with one ellipse focal axis) to the active medium rod (coaxial with the second focal axis).^{[33]}

In laserplasma produced EUV light sources used in microchip lithography, EUV light is generated by plasma positioned in the primary focus of an ellipsoid mirror and is collected in the secondary focus at the input of the lithography machine.^{[34]}
Ellipses in statistics and finance
In statistics, a bivariate random vector (X, Y) is jointly elliptically distributed if its isodensity contours — loci of equal values of the density function — are ellipses. The concept extends to an arbitrary number of elements of the random vector, in which case in general the isodensity contours are ellipsoids. A special case is the multivariate normal distribution. The elliptical distributions are important in finance because if rates of return on assets are jointly elliptically distributed then all portfolios can be characterized completely by their mean and variance — that is, any two portfolios with identical mean and variance of portfolio return have identical distributions of portfolio return.^{[35]}^{[36]}
Ellipses in computer graphics
Drawing an ellipse as a graphics primitive is common in standard display libraries, such as the MacIntosh QuickDraw API, and Direct2D on Windows. Jack Bresenham at IBM is most famous for the invention of 2D drawing primitives, including line and circle drawing, using only fast integer operations such as addition and branch on carry bit. M. L. V. Pitteway extended Bresenham's algorithm for lines to conics in 1967.^{[37]} Another efficient generalization to draw ellipses was invented in 1984 by Jerry Van Aken.^{[38]}
In 1970 Danny Cohen presented at the "Computer Graphics 1970" conference in England a linear algorithm for drawing ellipses and circles. In 1971, L. B. Smith published similar algorithms for all conic sections and proved them to have good properties.^{[39]} These algorithms need only a few multiplications and additions to calculate each vector.
It is beneficial to use a parametric formulation in computer graphics because the density of points is greatest where there is the most curvature. Thus, the change in slope between each successive point is small, reducing the apparent "jaggedness" of the approximation.
Drawing with Bézier paths
Composite Bézier curves may also be used to draw an ellipse to sufficient accuracy, since any ellipse may be construed as an affine transformation of a circle. The spline methods used to draw a circle may be used to draw an ellipse, since the constituent Bézier curves will behave appropriately under such transformations.
Drawing with three points of a parallelogram
Rytz’s construction can be used to find the minor and major axes and their angle of an ellipse from conjugate diameters (which can be seen as three points of a parallelogram). The method uses the conjugate diameters of an ellipse to map the ellipse to an unit circle under affine transformation and calculate the ellipse parameters from that.
Ellipses in optimization theory
It is sometimes useful to find the minimum bounding ellipse on a set of points. The ellipsoid method is quite useful for attacking this problem.
See also

Apollonius of Perga, the classical authority

Cartesian oval, a generalization of the ellipse

Circumconic and inconic

Conic section

Derivation of the Cartesian form for an ellipse

Ellipse fitting

Ellipsoid, a higher dimensional analog of an ellipse

Elliptic coordinates, an orthogonal coordinate system based on families of ellipses and hyperbolae

Elliptic partial differential equation

Elliptical distribution, in statistics

Geodesics on an ellipsoid

Great ellipse

Hyperbola

Kepler's laws of planetary motion

Matrix representation of conic sections

nellipse, a generalization of the ellipse for n foci

Oval

Parabola

Rytz’s construction, a method for finding the ellipse axes from conjugate diameters or a parallelogram

Spheroid, the ellipsoid obtained by rotating an ellipse about its major or minor axis

Steiner circumellipse, the unique ellipse circumscribing a triangle and sharing its centroid

Steiner inellipse, the unique ellipse inscribed in a triangle with tangencies at the sides' midpoints

Superellipse, a generalization of an ellipse that can look more rectangular or more "pointy"

True, eccentric, and mean anomaly
Notes

^ The "major axis" and "minor axis" are sometimes called the "transverse diameter" and "conjugate diameter"; see This usage is now rare.

^

^

^

^

^

^

^

^ The Mathematical Association of America (1976), The American Mathematical Monthly, vol. 83, page 207

^ .

^ Besant 1907, p. 57

^

^

^

^

^

^

^

^ Jameson, G.J.O. "inequalities for the perimeter of an ellipse", Mathematical Gazette 98, July 2014, 227234. doi: 10.2307/3621497

^ Chakerian, G. D. "A Distorted View of Geometry." Ch. 7 in Mathematical Plums (R. Honsberger, editor). Washington, DC: Mathematical Association of America, 1979.

^ Meserve 1983, p. 159

^

^

^ Lawrence, J. Dennis, A Catalog of Special Plane Curves, Dover Publ., 1972.

^

^ If the ellipse is illustrated as a meridional one for the earth, the tangential angle is equal to geodetic latitude, the angle \theta is the geocentric latitude, and parametric angle t is a parametric (or reduced) latitude of auxiliary circle

^ at MathWorld, derived from formula (58) and (60)Ellipse

^ clarifies problems with MathWorld formula (60)

^ Auxiliary circle and various ellipse formulas

^

^ David Drew. "Elliptical Gears". [1]

^

^ http://www.rpphotonics.com/lamp_pumped_lasers.html

^ http://www.cymer.com/plasma_chamber_detail/

^

^

^

^

^
References
External links
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.