#jsDisabledContent { display:none; } My Account |  Register |  Help

# Equivalent concentration

Article Id: WHEBN0009965379
Reproduction Date:

 Title: Equivalent concentration Author: World Heritage Encyclopedia Language: English Subject: Collection: Publisher: World Heritage Encyclopedia Publication Date:

### Equivalent concentration

In chemistry, the equivalent concentration or normality of a solution is defined as the molar concentration c_i divided by an equivalence factor f_\mathrm{eq}:

Normality = \frac {c_i}{f_\mathrm{eq}}

## Contents

• Unit Symbol N 1
• Usage 2
• Examples 3
• Criticism 4
• References 5

## Unit Symbol N

The unit symbol "N" is used to denote "Eq/L" (Equivalent per liter) which is normality. Although losing favor, medical reporting of serum concentrations in "mEq/L" (=0.001 N) still occurs.

## Usage

There are three common areas where normality is used as a measure of reactive species in solution:

• In acid-base chemistry, normality is used to express the concentration of hydronium ions (H3O+) or hydroxide ions (OH) in a solution. Here, 1/f_\mathrm{eq} is an integer value. Each solute can produce one or more equivalents of reactive species when dissolved.
• In redox reactions, the equivalence factor describes the number of electrons that an oxidizing or reducing agent can accept or donate. Here, 1/f_\mathrm{eq} can have a fractional (non-integer) value.
• In precipitation reactions, the equivalence factor measures the number of ions which will precipitate in a given reaction. Here, 1/f_\mathrm{eq} is an integer value.

Normal concentration of an ionic solution is intrinsically connected to the conductivity (electrolytic) through the equivalent conductivity.

## Examples

Normality can be used for acid-base titrations. For example, sulfuric acid (H2SO4) is a diprotic acid. Since only 0.5 mol of H2SO4 are needed to neutralize 1 mol of OH, the equivalence factor is:

f_\mathrm{eq}(H2SO4) = 0.5

If the concentration of a sulphuric acid solution is c(H2SO4) = 1 mol/L, then its normality is 2 N. It can also be called a "2 normal" solution.

Similarly, for a solution with c(H3PO4) = 1 mol/L, the normality is 3 N because phosphoric acid contains 3 acidic H atoms.

## Criticism

Normality is an ambiguous measure of the concentration of a solution. It needs a definition of the equivalence factor, which depends on the definition of equivalents. The same solution can possess different normalities for different reactions. The definition of the equivalence factor varies depending on the type of chemical reaction that is discussed: It may refer to equations, bases, redox species, precipitating ions, or isotopes. For example, a solution of MgCl2 that is 2 N with respect to a Cl ion, is only 1 N with respect to an Mg2+ ion. Since f_\mathrm{eq} may not be unequivocal, IUPAC and NIST discourage the use of normality.[1]

## References

1. ^ http://old.iupac.org/publications/analytical_compendium/Cha06sec3.pdf
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.

Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.