In electromagnetism, electric flux is the measure of flow of the electric field through a given area. Electric flux is proportional to the number of electric field lines going through a normally perpendicular surface. If the electric field is uniform, the electric flux passing through a surface of vector area S is

\Phi_E = \mathbf{E} \cdot \mathbf{S} = ES \cos \theta,
where E is the electric field (having units of V/m), E is its magnitude, S is the area of the surface, and θ is the angle between the electric field lines and the normal (perpendicular) to S.
For a nonuniform electric field, the electric flux dΦ_{E} through a small surface area dS is given by

d\Phi_E = \mathbf{E} \cdot d\mathbf{S}
(the electric field, E, multiplied by the component of area parallel to the field). The electric flux over a surface S is therefore given by the surface integral:

\Phi_E = \iint_S \mathbf{E} \cdot d\mathbf{S}
where E is the electric field and dS is a differential area on the closed surface S with an outward facing surface normal defining its direction.
For a closed Gaussian surface, electric flux is given by:

\Phi_E =\,\!\scriptstyle S\mathbf{E}\cdot d\mathbf{S} = \frac{Q}{\epsilon_0}\,\!
where

E is the electric field,

S is any closed surface,

Q is the total electric charge inside the surface S,

ε_{0} is the electric constant (a universal constant, also called the "permittivity of free space") (ε_{0} ≈ 8.854 187 817... x 10^{−12} farads per meter (F·m^{−1})).
This relation is known as Gauss' law for electric field in its integral form and it is one of the four Maxwell's equations.
While the electric flux is not affected by charges that are not within the closed surface, the net electric field, E, in the Gauss' Law equation, can be affected by charges that lie outside the closed surface. While Gauss' Law holds for all situations, it is only useful for "by hand" calculations when high degrees of symmetry exist in the electric field. Examples include spherical and cylindrical symmetry.
Electrical flux has SI units of volt metres (V m), or, equivalently, newton metres squared per coulomb (N m^{2} C^{−1}). Thus, the SI base units of electric flux are kg·m^{3}·s^{−3}·A^{−1}.
Its dimensional formula is [L^{3}MT^{−3}I^{−1}].
See also
related websites are following: http://www.citycollegiate.com/coulomb4_XII.htm^{[1]}
References
External links
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.