World Library  
Flag as Inappropriate
Email this Article

Joule–Thomson effect

In thermodynamics, the Joule–Thomson effect (also known as the Joule–Kelvin effect, Kelvin–Joule effect, or Joule–Thomson expansion) describes the temperature change of a gas or liquid when it is forced through a valve or porous plug while kept insulated so that no heat is exchanged with the environment.[1][2][3] This procedure is called a throttling process or Joule–Thomson process.[4] At room temperature, all gases except hydrogen, helium and neon cool upon expansion by the Joule–Thomson process; these three gases experience the same effect but only at lower temperatures.[5][6]

The effect is named after James Prescott Joule and William Thomson, 1st Baron Kelvin, who discovered it in 1852. It followed upon earlier work by Joule on Joule expansion, in which a gas undergoes free expansion in a vacuum and the temperature is unchanged, if the gas is ideal.

The throttling process is commonly exploited in thermal machines such as refrigerators, air conditioners, heat pumps, and liquefiers.[7]

Throttling is a fundamentally irreversible process. The throttling due to the flow resistance in supply lines, heat exchangers, regenerators, and other components of (thermal) machines is a source of losses that limits the performance.

The physical mechanism associated with the Joule-Thomson effect is closely related to that of a shock wave.[8]


  • Description 1
  • Physical mechanism 2
  • The Joule–Thomson (Kelvin) coefficient 3
  • Applications 4
  • Proof that the specific enthalpy remains constant 5
  • Throttling in the T-s diagram 6
  • Derivation of the Joule–Thomson (Kelvin) coefficient 7
  • Joule's second law 8
  • See also 9
  • References 10
  • Bibliography 11
  • External links 12


The adiabatic (no heat exchanged) expansion of a gas may be carried out in a number of ways. The change in temperature experienced by the gas during expansion depends not only on the initial and final pressure, but also on the manner in which the expansion is carried out.

  • If the expansion process is reversible, meaning that the gas is in thermodynamic equilibrium at all times, it is called an isentropic expansion. In this scenario, the gas does positive work during the expansion, and its temperature decreases.
  • In a free expansion, on the other hand, the gas does no work and absorbs no heat, so the internal energy is conserved. Expanded in this manner, the temperature of an ideal gas would remain constant, but the temperature of a real gas may either increase or decrease, depending on the initial temperature and pressure.
  • The method of expansion discussed in this article, in which a gas or liquid at pressure P1 flows into a region of lower pressure P2 via a valve or porous plug under steady state conditions and without change in kinetic energy, is called the Joule–Thomson process. During this process, enthalpy remains unchanged (see a proof below).
State-transition points for steam show a similar pattern to temperature inversion points on this T-s diagram for steam.

A throttling process proceeds along a constant-enthalpy curve in the direction of decreasing pressure, which means that the process occurs from right to left on a temperature-pressure diagram. If the pressure starts out high enough, the temperature increases as the pressure drops, until an inversion temperature is reached and a phase transition occurs, called the inversion point. After this, as the fluid continues its expansion, the temperature begins immediately to drop. If we measure this point, using a specific gas, for several constant enthalpies, and join the inversion points, a curve called the inversion line is obtained. The inversion line intersects the T-axis at some temperature, called the maximum inversion temperature, because inversion cannot occur above that temperature, regardless of pressure.

In vapor-compression refrigeration the gas must be throttled and cooled at the same time. Hydrogen must be cooled below its inversion temperature if any cooling is to be achieved by throttling. For hydrogen this temperature is −68 °C. This poses a problem for substances whose maximum inversion temperature is well below room temperature.[9]

Physical mechanism

The Joule-Thomson effect depends crucially on the small deviation from an ideal gas given by intermolecular forces, specifically both the attractive and the repulsive parts of the Van der Waals force as approximated (for example) by the Lennard-Jones potential.

As a gas expands, the average distance between molecules grows. Because of the attractive part of the intermolecular force, expansion causes an increase in the potential energy of the gas. If no external work is extracted in the process and no heat is transferred, the total energy of the gas remains the same because of the conservation of energy. The increase in potential energy thus implies a decrease in kinetic energy and therefore in temperature.

A second mechanism has the opposite effect. During gas molecule collisions, kinetic energy is temporarily converted into potential energy (corresponding to the repulsive part of the intermolecular force). As the average intermolecular distance increases, there is a drop in the number of collisions per time unit, which causes a decrease in average potential energy. Again, total energy is conserved, so this leads to an increase in kinetic energy (temperature).

Within the region bounded by the Joule–Thomson inversion curve, the former effect (work done internally against intermolecular attractive forces) dominates, and free expansion causes a decrease in temperature. Outside the region bounded by the inversion curve, gas molecules move faster and so collide more often, and the latter effect (reduced collisions causing a decrease in the average potential energy) dominates: Joule–Thomson expansion causes a temperature increase.

The Joule–Thomson (Kelvin) coefficient

Fig. 1 – Joule-Thomson coefficients for various gases at atmospheric pressure.

The rate of change of temperature T with respect to pressure P in a Joule–Thomson process (that is, at constant enthalpy H) is the Joule–Thomson (Kelvin) coefficient \mu_{\mathrm{JT}}. This coefficient can be expressed in terms of the gas's volume V, its heat capacity at constant pressure C_{\mathrm{p}}, and its coefficient of thermal expansion \alpha as:[1][3][10]

\mu_{\mathrm{JT}} = \left( {\partial T \over \partial P} \right)_H = \frac{V}{C_{\mathrm{p}}}\left(\alpha T - 1\right)\,

See the Derivation of the Joule–Thomson (Kelvin) coefficient below for the proof of this relation. The value of \mu_{\mathrm{JT}} is typically expressed in °C/bar (SI units: K/Pa) and depends on the type of gas and on the temperature and pressure of the gas before expansion. Its pressure dependence is usually only a few percent for pressures up to 100 bar.

All real gases have an inversion point at which the value of \mu_{\mathrm{JT}} changes sign. The temperature of this point, the Joule–Thomson inversion temperature, depends on the pressure of the gas before expansion.

In a gas expansion the pressure decreases, so the sign of \partial P is negative by definition. With that in mind, the following table explains when the Joule–Thomson effect cools or warms a real gas:

If the gas temperature is then \mu_{\mathrm{JT}} is since \partial P is thus \partial T must be so the gas
below the inversion temperature positive always negative negative cools
above the inversion temperature negative always negative positive warms

Helium and hydrogen are two gases whose Joule–Thomson inversion temperatures at a pressure of one atmosphere are very low (e.g., about 51 K (−222 °C) for helium). Thus, helium and hydrogen warm up when expanded at constant enthalpy at typical room temperatures. On the other hand nitrogen and oxygen, the two most abundant gases in air, have inversion temperatures of 621 K (348 °C) and 764 K (491 °C) respectively: these gases can be cooled from room temperature by the Joule–Thomson effect.[1]

For an ideal gas, \mu_{\mathrm{JT}} is always equal to zero: ideal gases neither warm nor cool upon being expanded at constant enthalpy.


In practice, the Joule–Thomson effect is achieved by allowing the gas to expand through a throttling device (usually a valve) which must be very well insulated to prevent any heat transfer to or from the gas. No external work is extracted from the gas during the expansion (the gas must not be expanded through a turbine, for example).

The effect is applied in the Linde technique as a standard process in the petrochemical industry, where the cooling effect is used to liquefy gases, and also in many cryogenic applications (e.g. for the production of liquid oxygen, nitrogen, and argon). Only when the Joule–Thomson coefficient for the given gas at the given temperature is greater than zero can the gas be liquefied at that temperature by the Linde cycle. In other words, a gas must be below its inversion temperature to be liquefied by the Linde cycle. For this reason, simple Linde cycle liquefiers cannot normally be used to liquefy helium, hydrogen, or neon.

Proof that the specific enthalpy remains constant

In thermodynamics so-called "specific" quantities are quantities per kilogram and are denoted by lower-case characters. So h, u, and v are the enthalpy, internal energy, and volume per kilogram, respectively. In a Joule–Thomson process the specific enthalpy h remains constant.[11] To prove this, the first step is to compute the net work done when a mass m of the gas moves through the plug. This amount of gas has a volume of V1 = m v1 in the region at pressure P1 (region 1) and a volume V2 = m v2 when in the region at pressure P2 (region 2). Then in region 1, the work done on the amount of gas by the rest of the gas is = m P1v1. In region 2, the work done by the amount of gas on the rest of the gas is m P2v2. So, the total work done on the mass m of gas is

mP_1 v_1 - mP_2 v_2.

The change in internal energy minus the total work done on the amount of gas is, by the first law of thermodynamics, the total heat supplied to the amount of gas. In the Joule–Thomson process the gas is insulated, so no heat is absorbed. This means that

mu_2 - mu_1 - mP_1 v_1 + mP_2 v_2 = 0

where u1 and u2 denote the specific internal energies of the gas in regions 1 and 2, respectively. Using the definition of the specific enthalpy h = u + Pv, the above equation implies that

h_1 = h_2

where h1 and h2 denote the specific enthalpies of the amount of gas in regions 1 and 2, respectively.

Throttling in the T-s diagram

Fig. 2 – T-s diagram of nitrogen. The red dome represents the two-phase region with the low-entropy side (the saturated liquid) and the high-entropy side (the saturated gas). The black curves give the T-s relation along isobars. The pressures are indicated in bar. The blue curves are isenthalps (curves of constant specific enthalpy). The specific enthalpies are indicated in kJ/kg. The specific points a, b, etc., are treated in the main text.

A very convenient way to get a quantitative understanding of the throttling process is by using diagrams. There are many types of diagrams (h-T diagram, h-P diagram, etc.) Commonly used are the so-called T-s diagrams. Figure 2 shows the T-s diagram of nitrogen as an example.[12] Various points are indicated as follows:

a) T = 300 K, p = 200 bar, s = 5.16 kJ/(kgK), h = 430 kJ/kg;
b) T = 270 K, p = 1 bar, s = 6.79 kJ/(kgK), h = 430 kJ/kg;
c) T = 133 K, p = 200 bar, s = 3.75 kJ/(kgK), h = 150 kJ/kg;
d) T = 77.2 K, p = 1 bar, s = 4.40 kJ/(kgK), h = 150 kJ/kg;
e) T = 77.2 K, p = 1 bar, s = 2.83 kJ/(kgK), h = 28 kJ/kg (saturated liquid at 1 bar);
f) T = 77.2 K, p = 1 bar, s = 5.41 kJ/(kgK), h =230 kJ/kg (saturated gas at 1 bar).

As shown before, throttling keeps h constant. E.g. throttling from 200 bar and 300 K (point a in fig. 2) follows the isenthalp (line of constant specific enthalpy) of 430 kJ/kg. At 1 bar it results in point b which has a temperature of 270 K. So throttling from 200 bar to 1 bar gives a cooling from room temperature to below the freezing point of water. Throttling from 200 bar and an initial temperature of 133 K (point c in fig. 2) to 1 bar results in point d, which is in the two-phase region of nitrogen at a temperature of 72.2 K. Since the enthalpy is an extensive parameter the enthalpy in d (hd) is equal to the enthalpy in e (he) multiplied with the mass fraction of the liquid in d (xd) plus the enthalpy in f (hf) multiplied with the mass fraction of the gas in d (1 − xd). So

h_d = x_d h_e + (1 - x_d) h_f.

With numbers: 150 = xd 28 + (1 − xd) 230 so xd is about 0.40. This means that the mass fraction of the liquid in the liquid–gas mixture leaving the throttling valve is 40%.

Derivation of the Joule–Thomson (Kelvin) coefficient

In this section a derivation of the formula

\mu_{\mathrm{JT}} \equiv \left( \frac{\partial T}{\partial P} \right)_H = \frac{V}{C_{\mathrm{p}}}\left(\alpha T - 1\right)\,

for the Joule–Thomson (Kelvin) coefficient is given.

The partial derivative of T with respect to P at constant H can be computed by expressing the differential of the enthalpy, dH, in terms of dT and dP, and solving for the ratio of dT and dP with dH = 0. The differential of the enthalpy is given by:

\mathrm{d}H = T \mathrm{d}S + V \mathrm{d}P.

Here, S is the entropy of the gas. Expressing dS in terms of dT and dP gives:

\mathrm{d}H = T\left(\frac{\partial S}{\partial T}\right)_{P}\mathrm{d}T + \left[V+T\left(\frac{\partial S}{\partial P}\right)_{T}\right] \mathrm{d}P.


C_{\mathrm{p}}= T\left(\frac{\partial S}{\partial T}\right)_{P},

(see Specific heat capacity) we can write:

\mathrm{d}H = C_{\mathrm{p}}\mathrm{d}T + \left[V+T\left(\frac{\partial S}{\partial P}\right)_{T}\right] \mathrm{d}P.

The remaining partial derivative of S can be expressed in terms of the coefficient of thermal expansion via a Maxwell relation as follows. The differential of the Gibbs energy is given by:

\mathrm{d}G = -S \mathrm{d}T + V \mathrm{d}P.

The symmetry of partial derivatives of G with respect to T and P implies that:

\left(\frac{\partial S}{\partial P}\right)_{T}= -\left(\frac{\partial V}{\partial T}\right)_{P}= -V\alpha\,

where α is the cubic coefficient of thermal expansion. Using this relation dH can be expressed as

\mathrm{d}H = C_{\mathrm{p}}\mathrm{d}T + V\left(1-T\alpha\right) \mathrm{d}P.

Solving for (\part T/\part P)_H by equating dH to zero gives:

\left( \frac{\partial T}{\partial P} \right)_H = \frac{V}{C_{\mathrm{p}}}\left(\alpha T - 1\right).

The cooling of a gas by pure isentropic expansion (a reversible adiabatic process where work, done by gas-expansion, causes it to cool) is not Joule-Thomson cooling.

Joule's second law

It is easy to verify that for an ideal gas defined by suitable microscopic postulates that αT = 1, so the temperature change of such an ideal gas at a Joule–Thomson expansion is zero. For such an ideal gas, this theoretical result implies that:

The internal energy of a fixed mass of an ideal gas depends only on its temperature (not pressure or volume).

This rule was originally found by Joule experimentally for real gases and is known as Joule's second law. More refined experiments of course found important deviations from it.[13][14][15]

See also


  1. ^ a b c R. H. Perry and D. W. Green (1984). Perry's Chemical Engineers' Handbook. McGraw-Hill.  
  2. ^ B. N. Roy (2002). Fundamentals of Classical and Statistical Thermodynamics. John Wiley & Sons.  
  3. ^ a b W. C. Edmister, B. I. Lee (1984). Applied Hydrocarbon Thermodynamics. Vol. 1 (2nd ed.). Gulf Publishing.  
  4. ^ F. Reif (1965). "Chapter 5 – Simple applications of macroscopic thermodynamics". Fundamentals of Statistical and Thermal Physics. McGraw-Hill.  
  5. ^ A. W. Adamson (1973). "Chapter 4 – Chemical thermodynamics. The First Law of Thermodynamics". A Textbook of Physical Chemistry (1st ed.). Academic Press.  
  6. ^ G. W. Castellan (1971). "Chapter 7 – Energy and the First Law of Thermodynamics; Thermochemistry". Physical Chemistry (2nd ed.). Addison-Wesley.  
  7. ^ M.J. Moran and H.N. Shapiro "Fundamentals of Engineering Thermodynamics" 5th Edition (2006) John Wiley & Sons, Inc.
  8. ^ Hoover, Wm G., Carol G. Hoover, and Karl P. Travis. "Shock-Wave Compression and Joule-Thomson Expansion." Physical review letters 112.14 (2014): 144504.
  9. ^ Thermodynamics An Engineering Approach (6th ed.). McGraw Hills. 2007. 
  10. ^ W.R. Salzman. "Joule Expansion". Department of Chemistry,  
  11. ^ See e.g. M.J. Moran and H.N. Shapiro "Fundamentals of Engineering Thermodynamics" 5th Edition (2006) John Wiley & Sons, Inc. page 147
  12. ^ Figure composed with data obtained with RefProp, NIST Standard Reference Database 23
  13. ^ Partington, J.R. (1949). An Advanced Treatise on Physical Chemistry, volume 1 Fundamental Principles. The Properties of Gases, Longmans, Green and Co., London, pp. 614–615.
  14. ^ Adkins, C.J. (1968/1983). Equilibrium Thermodynamics, (1st edition 1968), third edition 1983, Cambridge University Press, Cambridge UK, ISBN 0-521-25445-0, p. 116.
  15. ^ Bailyn, M. (1994). A Survey of Thermodynamics, American Institute of Physics Press, New York, ISBN 0-88318-797-3, p. 81.


  • M. W. Zemansky (1968). Heat and Thermodynamics; An Intermediate Textbook. McGraw-Hill. pp. 182, 355.  
  • D. V. Schroeder (2000). An Introduction to Thermal Physics. Addison Wesley Longman. p. 142.  
  • C. Kittel, H. Kroemer (1980). Thermal Physics. W. H. Freeman.  

External links

  • "Joule–Thomson process". Eric Weisstein's World of Physics. 
  • "Joule–Thomson coefficient". Eric Weisstein's World of Physics. 
  • "Joule–Thomson effect". the truncated free online version of the Encyclopædia Britannica. 
  • "Inversion Curve of Joule-Thomson Effect using Peng-Robinson CEOS". Demonstrations Projects of Wolfram Mathematica. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.