World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0000183950
Reproduction Date:

Title: Kerogen  
Author: World Heritage Encyclopedia
Language: English
Subject: Economy of Seychelles, Shell in situ conversion process, Shale oil extraction, Burgess Shale type preservation, Tholin
Collection: Oil Shale Geology, Petroleum, Soil Science
Publisher: World Heritage Encyclopedia


Kerogen (Greek κηρός "wax" and -gen, γένεση "birth") is a mixture of solvents because of the high molecular weight (upwards of 1,000 daltons or 1000 Da; 1Da= 1 atomic mass unit) of its component compounds. The soluble portion is known as bitumen. When heated to the right temperatures in the Earth's crust, (oil window ca. 50–150 °C, gas window ca. 150–200 °C, both depending on how quickly the source rock is heated) some types of kerogen release crude oil or natural gas, collectively known as hydrocarbons (fossil fuels). When such kerogens are present in high concentration in rocks such as shale they form possible source rocks. Shales rich in kerogens that have not been heated to a warmer temperature to release their hydrocarbons may form oil shale deposits.

The name "kerogen" was introduced by the Scottish Alexander Crum Brown in 1906.[2][3][4][5]


  • Formation of kerogen 1
  • Composition 2
  • Types 3
    • Type I: Sapropelic 3.1
    • Type II: Planktonic 3.2
    • Type II: Sulfurous 3.3
    • Type III: Humic 3.4
    • Type IV: Residue 3.5
  • Origin of material 4
    • Terrestrial 4.1
    • Extra-terrestrial 4.2
  • See also 5
  • References 6
  • External links 7

Formation of kerogen

With the demise of living matter, such as

  • European Association of Organic Geochemists
  • Organic Geochemistry (journal)

External links

  1. ^ Oilfield Glossary
  2. ^ Oxford English Dictionary 3rd Ed. (2003)
  3. ^ Teh Fu Yen; Chilingar, George V. (1976). Oil Shale. Amsterdam: Elsevier. p. 27.  
  4. ^ Hutton, Adrian C.; Bharati, Sunil; Robl, Thomas (1994). "Chemical and Petrographic Classification of Kerogen/Macerals". Energy Fuels (Elsevier Science) 8 (6): 1478–1488.  
  5. ^ D. R. Steuart in H. M. Cadell et al. Oil-Shales of Lothians iii. 142 (1906) "We are indebted to Professor Crum Brown, F.R.S., for suggesting the term Kerogen to express the carbonaceous matter in shale that gives rise to crude oil in distillation."
  6. ^ Kudzawu-D'Pherdd, R., 2010. "The Genesis of Kerogen, a write up in Petroleum Geochemistry" - (EASC 616), Department of Earth Science, University of Ghana-Legon, (unpublished).
  7. ^ Tucker M.E. (1988) Sedimentary Petrology, An Introduction, Blackwell, London. p197. ISBN 0-632-00074-0
  8. ^ Kudzawu-D'Pherdd, R., 2010. "The Genesis of Kerogen, a write up in Petroleum Geochemistry" - (EASC 616), Department of Earth Science, University of Ghana-Legon, (unpublished).
  9. ^ Teh Fu Yen; Chilingar, George V. (1976). Oil Shale. Amsterdam: Elsevier.  
  10. ^ Example of a Van Krevelen diagram
  11. ^ Tissot B. P., Welte D. H., “Petroleumformation and occurrence”, Springer Verlag Germany, 1984.
  12. ^ Krause FF, 2009
  13. ^ Weber G., Green J., ‘‘Guide to oil shale’’. NationalConference of State Legislatures. Washington D.C. USA.p. 21, 1981.
  14. ^ Nakamura, T. (2005) "Post-hydration thermal metamorphism of carbonaceous chondrites", Journal of Mineralogical and Petrological Sciences, volume 100, page 268, [3] (PDF) Retrieved 1 September 2007
  15. ^ Papoular, R. (2001) "The use of kerogen data in understanding the properties and evolution of interstellar carbonaceous dust", Astronomy and Astrophysics, volume 378, pages 597-607, [4] (PDF) Retrieved 1 September 2007


See also


  • Ocean or lake material often meet kerogen type III or IV classifications.
  • Ocean or lake material deposited under anoxic conditions often form kerogens of type I or II.
  • Most higher land plants produce kerogens of type III or IV.
  • Some coal contains type II kerogen.

The type of material is difficult to determine but several apparent patterns have been noticed.


Origin of material

Type IV kerogen contains mostly decomposed organic matter in the form of polycyclic aromatic hydrocarbons. They have no potential to produce hydrocarbons.[13]

Hydrogen: carbon ratio < 0.5

Type IV: Residue

Kerogen Type III is formed from terrestrial plant matter that is lacking in lipids or waxy matter. It forms from cellulose, the carbohydrate polymer that forms the rigid structure of terrestrial plants, lignin, a non-carbohydrate polymer formed from phenyl-propane units that binds the strings of cellulose together, and terpenes and phenolic compounds in the plant. Type III kerogen involving rocks are found to be the least productive upon pyrolysis and probably the least favorable deposits for oil generation

  • Land plants (coastal)
  • Hydrogen:carbon ratio < 1
  • Oxygen:carbon ratio 0.03 to 0.3
  • Material is thick, resembling wood or coal.
  • Tends to produce coal and gas (Recent research has shown that type III kerogens can actually produce oil under extreme conditions) [12]
  • Has very low hydrogen because of the extensive ring and aromatic systems

Type III: Humic

Similar to Type II but high in sulfur.

Type II: Sulfurous

They all have great tendencies to produce petroleum and are all formed from lipids deposited under reducing conditions.

  • Plankton (marine)
  • Hydrogen:carbon ratio < 1.25
  • Oxygen:carbon ratio 0.03 to 0.18
  • Tend to produce a mix of gas and oil.
  • Several types:

Type II kerogen is common in many oil shale deposits. It is based on marine organic materials, which are formed in reducing environments. Sulfur is found in substantial amounts in the associated bitumen and generally higher than the sulfur content of Type I or III. Although pyrolysis of Type II kerogen yields less oil than Type I, the amount acquired is still sufficient to consider Type II bearing rocks as potential oil sources

Type II: Planktonic

Type 1 oil shales yield larger amount of volatile or extractable compounds than other types upon pyrolysis. Hence, from the theoretical view, Type 1 kerogen oil shales provide the highest yield of oil and are the most promising deposits in terms of conventional oil retorting [11]

Type I: Sapropelic

A Van Krevelen diagram is one example of classifying kerogens, where they tend to form groups when the ratios of hydrogen to carbon and oxygen to carbon are compared.[10]

Labile kerogen breaks down to form heavy hydrocarbons (i.e. oils), refractory kerogen breaks down to form light hydrocarbons (i.e. gases), and inert kerogen forms graphite.


As kerogen is a mixture of organic material, rather than a specific chemical, it cannot be given a chemical formula. Indeed, its chemical composition can vary distinctively from sample to sample. Kerogen from the Green River Formation oil shale deposit of western North America contains elements in the proportions carbon 215 : hydrogen 330 : oxygen 12 : nitrogen 5 : sulfur 1.[9]


The formation of polymers in this way accounts for the large sedimentation and progressive burial or overburden provide significant pressure and a temperature gradient. When these humic precursors are subjected to sufficient geothermal pressures for sufficient geologic time, they begin to undergo certain specific changes to become kerogen. Such changes are indicative of the maturity stage of a particular kerogen. These changes include loss of hydrogen, oxygen, nitrogen, and sulfur, which leads to loss of other functional groups that further promote isomerization and aromatization which are associated with increasing depth or burial. Aromatization then allows for neat molecular stacking in sheets, which in turn increases molecular density and vitrinite reflectance properties, as well as changes in spore coloration, characteristically from yellow to orange to brown to black with increasing depth.[8]

. kerogen shale) resulting in a sedimentary rock like geopolymer. This polymerization usually happens alongside the formation of a mineral component (polymers to form polycondense). These dismantled components are units that can then [7]photosynthesis process is basically the reverse of break-down (1988), this Maurice Tucker begin to dismantle either partially or completely. (According to carbohydrates and proteins from biopolymers process, large break-down In this [6]

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.