World Library  
Flag as Inappropriate
Email this Article

Magnetic constant


Magnetic constant

This article is about the magnetic constant. For the analogous electric constant, see vacuum permittivity.

The physical constant μ0, commonly called the vacuum permeability, permeability of free space, or magnetic constant is an ideal, (baseline) physical constant, which is the value of magnetic permeability in a classical vacuum. Vacuum permeability is derived from production of a magnetic field by an electric current or by a moving electric charge and in all other formulas for magnetic-field production in a vacuum. In the reference medium of classical vacuum, µ0 has an exact defined value:[1][2]

µ0 = ×10 V·s/(A·m) ≈ 1.256637061-2...×10 Hm−1 or N·A−2 or T·m/A or Wb/(A·m)

in the SI system of units.

As a constant, it can also be defined as a fundamental invariant quantity, and is also one of three components that defines free space through Maxwell's equations. In classical physics, free space is a concept of electromagnetic theory, corresponding to a theoretically perfect vacuum and sometimes referred to as the vacuum of free space, or as classical vacuum, and is appropriately viewed as a reference medium.[3][4]

The ampere defines vacuum permeability

The ampere is that constant current which, if maintained in two straight parallel conductors of infinite length, of negligible circular cross section, and placed 1 meter apart in vacuum, would produce between these conductors a force equal to 2×10 newton per meter of length.

Adopted in 1948, the effect of this definition is to fix the magnetic constant (permeability of vacuum) at exactly ×10 H⋅m−1.[5] To further illustrate:

Two thin, straight, stationary, parallel wires, a distance r apart in free space, each carrying a current I, will exert a force on each other. Ampère's force law states that the force per unit length is given by[6]


The ampere is defined so that if the wires are 1 m apart and the current in each wire is 1 A, the force between the two wires is 2×10 N m-1. Hence the value of μ0 is defined to be exactly

\mu_0 = 4 \pi \times 10^{-7} (\rm{N / A ^2} ) \approx 1.2566370614 \cdots \times 10 ^{-6} (\rm{N / A ^2} )[7][8]


Historically, the constant μ0 has had different names. In the 1987 IUPAP Red book, for example, this constant was still called permeability of vacuum.[9] Another, now rather rare and obsolete, term is "magnetic permittivity of vacuum". See, for example, Servant et al.[10] The term "vacuum permeability" (and variations thereof, such as "permeability of free space") remains very widespread. However, Standards Organizations have recently moved to magnetic constant as the preferred name for μ0, although the older name continues to be listed as a synonym.[8]

The name "magnetic constant" is used by standards organizations in order to avoid use of the terms "permeability" and "vacuum", which have physical meanings. This change of preferred name has been made because μ0 is a defined value, and is not the result of experimental measurement (see below).

Systems of units and historical origin of value of μ0

In principle, there are several equation systems that could be used to set up a system of electrical quantities and units.[11] Since the late 19th century, the fundamental definitions of current units have been related to the definitions of mass, length and time units, using Ampère's force law. However, the precise way in which this has "officially" been done has changed many times, as measurement techniques and thinking on the topic developed. The overall history of the unit of electric current, and of the related question of how to define a set of equations for describing electromagnetic phenomena, is very complicated. Briefly, the basic reason why μ0 has the value it does is as follows.

Ampère's force law describes the experimentally-derived fact that, for two thin, straight, stationary, parallel wires, a distance r apart, in each of which a current I flows, the force per unit length, Fm, that one wire exerts upon the other in the vacuum of free space would be given by

F_{\mathrm{m}} \propto \frac {I^2} {r}. \;

Writing the constant of proportionality as km gives

F_{\mathrm{m}} = k_{\mathrm{m}} \frac {I^2} {r}. \;

The form of km needs to be chosen in order to set up a system of equations, and a value then needs to be allocated in order to define the unit of current.

In the old "electromagnetic (emu)" system of equations defined in the late 1800s, km was chosen to be a pure number, 2, distance was measured in centimetres, force was measured in the cgs unit dyne, and the currents defined by this equation were measured in the "electromagnetic unit (emu) of current" (also called the "abampere"). A practical unit to be used by electricians and engineers, the ampere, was then defined as equal to one tenth of the electromagnetic unit of current.

In another system, the "rationalized-metre-kilogram-second (rmks) system" (or alternatively the "metre-kilogram-second-ampere (mksa) system"), km is written as μ0/2π, where μ0 is a measurement-system constant called the "magnetic constant".[12] The value of μ0 was chosen such that the rmks unit of current is equal in size to the ampere in the emu system: μ0 is defined to be 4π × 10−7 N A−2.[5]

Historically, several different systems (including the two described above) were in use simultaneously. In particular, physicists and engineers used different systems, and physicists used three different systems for different parts of physics theory and a fourth different system (the engineers' system) for laboratory experiments. In 1948, international decisions were made by standards organizations to adopt the rmks system, and its related set of electrical quantities and units, as the single main international system for describing electromagnetic phenomena in the International System of Units.

Ampère's law as stated above describes a physical property of the world. However, the choices about the form of km and the value of μ0 are totally human decisions, taken by international bodies composed of representatives of the national standards organizations of all participating countries. The parameter μ0 is a measurement-system constant, not a physical constant that can be measured. It does not, in any meaningful sense, describe a physical property of the vacuum.[13] This is why the relevant Standards Organizations prefer the name "magnetic constant", rather than any name that carries the hidden and misleading implication that μ0 describes some physical property.

Significance in electromagnetism

The magnetic constant μ0 appears in Maxwell's equations, which describe the properties of electric and magnetic fields and electromagnetic radiation, and relate them to their sources. In particular, it appears in relationship to quantities such as permeability and magnetization density, such as the relationship that defines the magnetic H-field in terms of the magnetic B-field. In real media, this relationship has the form:


where M is the magnetization density. In vacuum, M = 0.

In SI units, the electric constant (vacuum permittivity), ε0, by the definition:


This relation can be derived using Maxwell's equations of classical electromagnetism in the medium of classical vacuum, but this relation is used by BIPM and NIST as a definition of ε0 in terms of the defined numerical values for c0 and μ0, and is not presented as a derived result contingent upon the validity of Maxwell's equations.[14]

See also

References and notes

ca:Permeabilitat del buit

el:Μαγνητική σταθερά it:Permeabilità magnetica sl:indukcijska konstanta uk:Магнітна константа

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.