### Orientable

In .

The notion of orientability can be generalised to higher dimensional manifolds as well. A manifold is orientable if it has a consistent choice of orientation, and a connected orientable manifold has exactly two different possible orientations. In this setting, various equivalent formulations of orientability can be given, depending on the desired application and level of generality. Formulations applicable to general topological manifolds often employ methods of homology theory, whereas for differentiable manifolds more structure is present, allowing a formulation in terms of differential forms. An important generalization of the notion of orientability of a space is that of orientability of a family of spaces parameterized by some other space (a fiber bundle) for which an orientation must be selected in each of the spaces which varies continuously with respect to changes in the parameter values.

## Contents

## Orientable surfaces

A surface *S* in the Möbius strip. Thus, for surfaces, the Möbius strip may be considered the source of all non-orientability.

For an orientable surface, a consistent choice of "clockwise" (as opposed to counter-clockwise) is called an **orientation**, and the surface is called **oriented**. For surfaces embedded in Euclidean space, an orientation is specified by the choice of a continuously varying surface normal **n** at every point. If such a normal exists at all, then there are always two ways to select it: **n** or −**n**. More generally, an orientable surface admits exactly two orientations, and the distinction between an orient*ed* surface and an orient*able* surface is subtle and frequently blurred. An orientable surface is an abstract surface that admits an orientation, while an oriented surface is a surface that is abstractly orientable, and has the additional datum of a choice of one of the two possible orientations.

- Examples

Most surfaces we encounter in the physical world are orientable. Spheres, planes, and tori are orientable, for example. But Möbius strips, real projective planes, and Klein bottles are non-orientable. They, as visualized in 3-dimensions, all have just one side. The real projective plane and Klein bottle cannot be embedded in **R**^{3}, only immersed with nice intersections.

Note that locally an embedded surface always has two sides, so a near-sighted ant crawling on a one-sided surface would think there is an "other side". The essence of one-sidedness is that the ant can crawl from one side of the surface to the "other" without going through the surface or flipping over an edge, but simply by crawling far enough.

In general, the property of being orientable is not equivalent to being two-sided; however, this holds when the ambient space (such as **R**^{3} above) is orientable. For example, a torus embedded in

- $K^2\; \backslash times\; S^1$

can be one-sided, and a Klein bottle in the same space can be two-sided; here $K^2$ refers to the Klein bottle.

- Orientation by triangulation

Any surface has a triangulation: a decomposition into triangles such that each edge on a triangle is glued to at most one other edge. Each triangle is oriented by choosing a direction around the perimeter of the triangle, associating a direction to each edge of the triangle. If this is done in such a way that, when glued together, neighboring edges are pointing in the opposite direction, then this determines an orientation of the surface. Such a choice is only possible if the surface is orientable, and in this case there are exactly two different orientations.

If the figure can be consistently positioned at all points of the surface without turning into its mirror image, then this will induce an orientation in the above sense on each of the triangles of the triangulation by selecting the direction of each of the triangles based on the order red-green-blue of colors of any of the figures in the interior of the triangle.

This approach generalizes to any *n*-manifold having a triangulation. However, some 4-manifolds do not have a triangulation, and in general for *n* > 4 some *n*-manifolds have triangulations that are inequivalent.

## Orientability of manifolds

### Topological definitions

An *n*-dimensional manifold (either embedded in a finite dimensional vector space, or an abstract manifold) is called non-orientable if it is possible to take the homeomorphic image of an *n*-dimensional ball in the manifold and move it through the manifold and back to itself, so that at the end of the path, the ball has been reflected, using the same definition as for surfaces above. Equivalently, a *n*-dimensional manifold is non-orientable if it contains a homeomorphic image of the space formed by taking the direct product of a (*n*-1)-dimensional ball *B* and the unit interval [0,1] and gluing the ball B×{0} at one end to the ball B×{1} at other end with a single reflection. For surfaces, this space is a Möbius strip; for 3-manifolds, this is a solid Klein bottle.

As another alternative definition, in the language of structure groups, an orientable manifold is one whose structure group (a priori GL(*n*)) can be reduced to the subgroup GL^{+}(*n*) of orientation-preserving transforms. Concretely, an orientable manifold is one that has a cover of open *n*-dimensional balls with consistent orientations (i.e. all transition maps are orientation preserving). Here one needs to define what a local orientation means, which can be done using orientations of vector bundles (a local orientation is an orientation of the tangent spaces at a point) or using singular homology (an orientation is a choice of generator of the *n*-th relative homology group

- $H\_n(M,\; M\backslash setminus\backslash \{p\backslash \};\; \backslash mathbb\{Z\})$

at a point *p*). A manifold is then said to be orientable if one can choose local orientations consistently throughout the manifold.

Using homology allows one to define orientability for compact *n*-manifolds without considering local orientations. A compact *n*-manifold *M* is orientable if and only if the top homology group,

- $H\_n(M,\; \backslash partial\; M;\; \backslash mathbb\{Z\})$, is isomorphic to $\backslash mathbb\{Z\}$.

Considering simplicial homology, which applies to any triangulable manifold, allows one to consider this a concrete statement about coherently orienting top-dimensional simplices in a triangulation, as done in the surface case above.

If the manifold has a differentiable structure, one can use the language of differential forms (see below).

### Orientation of differential manifolds

Another way of thinking about orientability is thinking of it as a choice of "right handedness" vs. "left handedness" at each point in the manifold. A differentiable manifold is said to be orientable if it is possible to select coordinate transitions so that there is a consistent choice of "right-hand" in each coordinate patch. More precisely, the manifold has a coordinate atlas all of whose transition functions have positive Jacobian determinants. A maximal such atlas gives an orientation on the manifold, and the manifold so equipped is then called **oriented**.^{[1]}

Equivalently, a *n*-dimensional differentiable manifold is orientable if there is a consistent choice of oriented basis of tangent vectors at every point of the manifold. This can be formalized in a variety of ways, one of which is the condition that *M* should possess a volume form: a differential form ω of degree *n* which is nonzero at every point on the manifold. Given such an *n*-form, the atlas consisting of local diffeomorphisms sending ω to a positive multiple of the Euclidean volume form on **R**^{n} is oriented.

## Orientable double cover

A closely related notion uses the idea of covering space. For a connected manifold *M* take *M**, the set of pairs (*x*, o) where *x* is a point of *M* and *o* is an orientation at *x*; here we assume *M* is either smooth so we can choose an orientation on the tangent space at a point or we use singular homology to define orientation. Then for every open, oriented subset of *M* we consider the corresponding set of pairs and define that to be an open set of *M**. This gives *M** a topology and the projection sending (*x*, o) to *x* is then a 2-1 covering map. This covering space is called the **orientable double cover**, as it is orientable. *M** is connected if and only if *M* is not orientable.

Another way to construct this cover is to divide the loops based at a basepoint into either orientation-preserving or orientation-reversing loops. The orientation preserving loops generate a subgroup of the fundamental group which is either the whole group or of index two. In the latter case (which means there is an orientation-reversing path), the subgroup corresponds to a connected double covering; this cover is orientable by construction. In the former case, one can simply take two copies of *M*, each of which corresponds to a different orientation.

## Orientation of vector bundles

A real vector bundle, which *a priori* has a GL(n) structure group, is called *orientable* when the structure group may be reduced to $GL^\{+\}(n)$, the group of matrices with positive determinant. For the tangent bundle, this reduction is always possible if the underlying base manifold is orientable and in fact this provides a convenient way to define the orientability of a smooth real manifold: a smooth manifold is defined to be orientable if its tangent bundle is orientable (as a vector bundle). Note that as a manifold in its own right, the tangent bundle is *always* orientable, even over nonorientable manifolds.

## Related concepts

### Linear algebra

The notion of orientability is essentially derived from the topology of the real general linear group

- $\backslash operatorname\{GL\}(n,\backslash mathbf\{R\})$, specifically that the lowest homotopy group is $\backslash pi\_0(\backslash operatorname\{GL\}(n,\backslash mathbf\{R\}))=\backslash mathbf\{Z\}/2$

an invertible transform of a real vector space is either orientation-preserving or orientation-reversing.

This holds not only for differentiable manifolds but for topological manifolds, as the space of self-homotopy equivalences of a sphere also has two connected components, which can be denoted the "orientation-preserving" and "orientation-reversing" maps.

The analogous notion for the symmetric group is the alternating group of even permutations.

### Lorentzian geometry

In Lorentzian geometry, there are two kinds of orientability: space orientability and time orientability. These play a role in the causal structure of spacetime.^{[2]} In the context of general relativity, a space-time manifold is space orientable if, whenever two right-handed observers head off in rocket ships starting at the same space-time point, and then meet again at another point, they remain right-handed with respect to one another. If a space-time is time-orientable then the two observers will always agree on the direction of time at both points of their meeting. In fact, a space-time is time-orientable if and only if any two observers can agree which of the two meetings preceded the other.^{[3]}

Formally, the pseudo-orthogonal group O(*p*,*q*) has a pair of characters: the space orientation character σ_{+} and the time orientation character σ_{−},

- $\backslash sigma\_\{\backslash pm\}:\; \backslash operatorname\{O\}(p,q)\backslash to\; \backslash \{-1,+1\backslash \}.$

Their product σ = σ_{+}σ_{−} is the determinant, which gives the orientation character. A space-orientation of a pseudo-Riemannian manifold is identified with a section of the associated bundle

- $\backslash operatorname\{O\}(M)\; \backslash times\_\{\backslash sigma\_+\}\; \backslash \{-1,+1\backslash \}$

where O(*M*) is the bundle of pseudo-orthogonal frames. Similarly, a time orientation is a section of the associated bundle

- $\backslash operatorname\{O\}(M)\; \backslash times\_\{\backslash sigma\_-\}\; \backslash \{-1,+1\backslash \}.$

## See also

## References

## External links

- Orientation of manifolds at the Manifold Atlas.
- Orientation covering at the Manifold Atlas.
- Orientation of manifolds in generalized cohomology theories at the Manifold Atlas.
- The Encyclopedia of Mathematics article on Orientation.de:Orientierung (Mathematik)#Orientierung einer Mannigfaltigkeit