Visualization of the sagitta
In geometry, the sagitta of a circular arc is the distance from the center of the arc to the center of its base.^{[1]} It is used extensively in architecture when calculating the arc necessary to span a certain height and distance and also in optics where it is used to find the depth of a spherical mirror or lens. The name comes directly from Latin sagitta, meaning an arrow.
Contents

Formulas 1

Approximation 2

Applications 3

References 4

External links 5
Formulas
In the following equations, s denotes the sagitta (the depth of the arc), r equals the radius of the circle, and \ell half the length of the chord spanning the base of the arc. The sagitta may be calculated from these quantities as

s = r  \sqrt{r^2  \left(\frac{\ell}{2}\right)^2}.
The sagitta may also be calculated from the versine function, for an arc that spans an angle of \theta, and coincides with the versine for unit circles:

s = r \operatorname{versin}\frac{\theta}{2} = r\left(1\cos\frac{\theta}{2}\right).
Alternatively, the Pythagorean theorem

r^2 = \ell^2 + (rs)^2
may be rearranged to give a formula for the radius as a function of the sagitta and halfchord length:

r = \frac{s^2 + \ell^2}{2s}.
Also, this can also be rearranged to find the length of the halfchord.

\ell = \sqrt{2rss^2}.
Approximation
When the sagitta is small in comparison to the radius, it may be approximated by the formula

s\approx \frac{\ell^2}{2r}.^{[1]}
Alternatively, if the sagitta is small and the sagitta, radius, and halfchord length are known, they may be used to estimate the arc length by the formula

a\approx\ell+\frac{s^2}{r},
where a is half the length of the arc; this formula was known to the Chinese mathematician Shen Kuo, and a more accurate formula also involving the sagitta was developed two centuries later by Guo Shoujing.^{[2]}
Applications
Architects, engineers, and contractors use these equations to create "flattened" arcs that are used in curved walls, arched ceilings, bridges, and numerous other applications.
The sagitta also has uses in physics where it is used, along with chord length, to calculate the radius of curvature of an accelerated particle. This is used especially in bubble chamber experiments where it is used to determine the momenta of decay particles.
References

^ ^{a} ^{b} Woodward, Ernest (1978), Geometry  Plane, Solid & Analytic Problem Solver, Research & Education Assoc., p. 359, .

^ Needham, Joseph (1959), Science and Civilisation in China: Volume 3, Mathematics and the Sciences of the Heavens and the Earth, Cambridge University Press, p. 39, .
External links

Calculating the Sagitta of an Arc
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.