World Library  
Flag as Inappropriate
Email this Article

Young's modulus

Article Id: WHEBN0000228108
Reproduction Date:

Title: Young's modulus  
Author: World Heritage Encyclopedia
Language: English
Subject: Specific modulus, Hooke's law, Elastic modulus, Stiffness, Elastography
Collection: Elasticity (Physics), Physical Quantities
Publisher: World Heritage Encyclopedia

Young's modulus

Rubber, a material with an extremely low Young's modulus

Young's modulus, which is also known as the elastic modulus, is a mechanical property of linear elastic solid materials. It defines the relationship between stress (force per unit area) and strain (proportional deformation) in a material.

Young's modulus is named after the 19th-century British scientist Thomas Young. However, the concept was developed in 1727 by Leonhard Euler, and the first experiments that used the concept of Young's modulus in its current form were performed by the Italian scientist Giordano Riccati in 1782, pre-dating Young's work by 25 years.[1] The term modulus is the diminutive of the Latin term modus which means measure.

A solid body deforms when a load is applied to it. If the material is elastic, the body returns to its original shape after the load is removed. The material is linear if the ratio of load to deformation remains constant during the loading process. Not many materials are linear and elastic beyond a small amount of deformation. A constant Young's modulus applies only to linear elastic materials. A perfectly rigid material has an infinite Young's modulus because an infinite force is needed to deform such a material. A material whose Young's modulus is very high can be approximated as rigid.[2]

A stiff material needs more force to deform compared to a soft material. Therefore, the Young's modulus is a measure of the stiffness of a solid material. Do not confuse:

  • stiffness and strength: the strength of material is the amount of force it can withstand and still recover its original shape;
  • material stiffness and geometric stiffness: the geometric stiffness depends on shape, e.g. the stiffness of an I beam is much higher than that of a spring made of the same steel thus having the same rigidity;
  • stiffness and hardness: the hardness of a material defines the relative resistance that its surface imposes against the penetration of a harder body;
  • stiffness and toughness: toughness is the amount of energy that a material can absorb before fracturing.


  • Technical 1
    • Units 1.1
  • Usage 2
    • Linear versus non-linear 2.1
    • Directional materials 2.2
  • Calculation 3
    • Force exerted by stretched or contracted material 3.1
    • Elastic potential energy 3.2
    • Relation among elastic constants 3.3
  • Approximate values 4
  • See also 5
  • References 6
  • Further reading 7
  • External links 8


The technical definition is: the ratio of the stress (force per unit area) along an axis to the strain (ratio of deformation over initial length) along that axis in the range of stress in which Hooke's law holds.[3]

Young's modulus is the most common elastic modulus, sometimes called the modulus of elasticity, but there are other elastic moduli such as the bulk modulus and the shear modulus.


Young's modulus is the ratio of stress (which has units of pressure) to strain (which is dimensionless), and so Young's modulus has units of pressure. Its SI unit is therefore the pascal (Pa or N/m2 or m−1·kg·s−2). The practical units used are megapascals (MPa or N/mm2) or gigapascals (GPa or kN/mm2). In United States customary units, it is expressed as pounds (force) per square inch (psi). The abbreviation ksi refers to "kpsi", or thousands of pounds per square inch.


The Young's modulus enables the calculation of the change in the dimension of a bar made of an isotropic elastic material under tensile or compressive loads. For instance, it predicts how much a material sample extends under tension or shortens under compression. The Young's modulus directly applies to cases of uniaxial stress, that is tensile or compressive stress in one direction and no stress in the other directions. Young's modulus is also used in order to predict the deflection that will occur in a statically determinate beam when a load is applied at a point in between the beam's supports. Other elastic calculations usually require the use of one additional elastic property, such as the shear modulus, bulk modulus or Poisson's ratio. Any two of these parameters are sufficient to fully describe elasticity in an isotropic material.

Linear versus non-linear

Young's modulus represents the factor of proportionality in Hooke's law, which relates the stress and the strain. However, Hooke's law is only valid under the assumption of an elastic and linear response. Any real material will eventually fail and break when stretched over a very large distance or with a very large force; however all solid materials exhibit nearly Hookean behavior for small enough strains or stresses. If the range over which Hooke's law is valid is large enough compared to the typical stress that one expects to apply to the material, the material is said to be linear. Otherwise (if the typical stress one would apply is outside the linear range) the material is said to be non-linear.

Steel, carbon fiber and glass among others are usually considered linear materials, while other materials such as rubber and soils are non-linear. However, this is not an absolute classification: if very small stresses or strains are applied to a non-linear material, the response will be linear, but if very high stress or strain is applied to a linear material, the linear theory will not be enough. For example, as the linear theory implies reversibility, it would be absurd to use the linear theory to describe the failure of a steel bridge under a high load; although steel is a linear material for most applications, it is not in such a case of catastrophic failure.

In solid mechanics, the slope of the stress–strain curve at any point is called the tangent modulus. It can be experimentally determined from the slope of a stress–strain curve created during tensile tests conducted on a sample of the material. The tangent modulus of the initial, linear portion of a stress–strain curve is called Young's modulus.

Directional materials

Young's modulus is not always the same in all orientations of a material. Most metals and ceramics, along with many other materials, are isotropic, and their mechanical properties are the same in all orientations. However, metals and ceramics can be treated with certain impurities, and metals can be mechanically worked to make their grain structures directional. These materials then become anisotropic, and Young's modulus will change depending on the direction of the force vector. Anisotropy can be seen in many composites as well. For example, carbon fiber has much higher Young's modulus (is much stiffer) when force is loaded parallel to the fibers (along the grain). Other such materials include wood and reinforced concrete. Engineers can use this directional phenomenon to their advantage in creating structures.


Young's modulus, E, can be calculated by dividing the tensile stress by the extensional strain in the elastic (initial, linear) portion of the stress–strain curve:

E \equiv \frac{\mbox {tensile stress}}{\mbox {extensional strain}} = \frac{\sigma}{\varepsilon}= \frac{F/A_0}{\Delta L/L_0} = \frac{F L_0} {A_0 \Delta L}


E is the Young's modulus (modulus of elasticity)
F is the force exerted on an object under tension;
A0 is the original cross-sectional area through which the force is applied;
ΔL is the amount by which the length of the object changes;
L0 is the original length of the object.

Force exerted by stretched or contracted material

The Young's modulus of a material can be used to calculate the force it exerts under specific strain.

F = \frac{E A_0 \Delta L} {L_0}

where F is the force exerted by the material when contracted or stretched by ΔL.

Hooke's law can be derived from this formula, which describes the stiffness of an ideal spring:

F = \left( \frac{E A_0} {L_0} \right) \Delta L = k x \,

where it comes in saturation

k = \begin{matrix} \frac {E A_0} {L_0} \end{matrix} \, and x = \Delta L. \,

Elastic potential energy

The elastic potential energy stored is given by the integral of this expression with respect to L:

U_e = \int {\frac{E A_0 \Delta L} {L_0}}\, d\Delta L = \frac {E A_0} {L_0} \int { \Delta L }\, d\Delta L = \frac {E A_0 {\Delta L}^2} {2 L_0}

where U is the elastic potential energy.

The elastic potential energy per unit volume is given by:

\frac{U_e} {A_0 L_0} = \frac {E {\Delta L}^2} {2 L_0^2} = \frac {1} {2} E {\varepsilon}^2, where \varepsilon = \frac {\Delta L} {L_0} is the strain in the material.M

This formula can also be expressed as the integral of Hooke's law:

U_e = \int {k x}\, dx = \frac {1} {2} k x^2.

Relation among elastic constants

For homogeneous isotropic materials simple relations exist between elastic constants (Young's modulus E, shear modulus G, bulk modulus K, and Poisson's ratio ν) that allow calculating them all as long as two are known:

E = 2G(1+\nu) = 3K(1-2\nu).\,

Approximate values

Influences of selected glass component additions on Young's modulus of a specific base glass

Young's modulus can vary somewhat due to differences in sample composition and test method. The rate of deformation has the greatest impact on the data collected, especially in polymers. The values here are approximate and only meant for relative comparison.

Approximate Young's modulus for various materials
Material GPa psi
Rubber (small strain) 0.01–0.1[4] 1,450–14,503
Low density polyethylene[5] 0.11–0.86 16,000–65,000
Diatom frustules (largely silicic acid)[6] 0.35–2.77 50,000–400,999
PTFE (Teflon) 0.5 [4] 75,000
HDPE 0.8 116,000
Bacteriophage capsids[7] 1–3 150,000–435,000
Polypropylene 1.5–2[4] 218,000–290,785
Polyethylene terephthalate (PET) 2–2.7[4] 290,000–390,000
Nylon 2–4 290,000–580,000
Polystyrene 3–3.5[4] 440,000–510,000
Medium-density fiberboard (MDF)[8] 4 580,000
wood (along grain) 11[4] 1.60×106
Human Cortical Bone[9] 14 2.03×106
Glass-reinforced polyester matrix [10] 17.2 2.49×106
Aromatic peptide nanotubes [11][12] 19–27 2.76×1063.92×106
High-strength concrete 30[4] 4.35×106
Carbon fiber reinforced plastic (50/50 fibre/matrix, biaxial fabric) 30–50[13] 4.35×1067.25×106
Hemp fiber [14] 35 5.08×106
Magnesium metal (Mg) 45[4] 6.53×106
Glass (see chart) 50–90[4] 7.25×1061.31×107
Flax fiber [15] 58 8.41×106
Aluminum 69[4] 1.0×107
Mother-of-pearl (nacre, largely calcium carbonate) [16] 70 1.02×107
Aramid[17] 70.5–112.4 1.02×1071.63×107
Tooth enamel (largely calcium phosphate)[18] 83 1.2×107
Stinging nettle fiber [19] 87 1.26×107
Bronze 96–120[4] 1.39×1071.74×107
Brass 100–125[4] 1.45×1071.81×107
Titanium (Ti) 110.3 1.6×107[4]
Titanium alloys 105–120[4] 1.5×1071.75×107
Copper (Cu) 117 1.7×107
Carbon fiber reinforced plastic (70/30 fibre/matrix, unidirectional, along grain)[20] 181 2.63×107
Silicon Single crystal, different directions [21][22] 130–185 1.89×1072.68×107
Wrought iron 190–210[4] 2.76×1073.05×107
Steel (ASTM-A36) 200[4] 2.9×107
polycrystalline Yttrium iron garnet (YIG)[23] 193 2.8×107
single-crystal Yttrium iron garnet (YIG)[24] 200 2.9×107
Cobalt-chrome (CoCr)[25] 220-258 2.9×107
Aromatic peptide nanospheres [26] 230–275 3.34×1073.99×107
Beryllium (Be)[27] 287 4.16×107
Molybdenum (Mo) 329 - 330 [4] [28] [29] 4.77×1074.79×107
Tungsten (W) 400 – 410 [4] 5.8×1075.9×107
Silicon carbide (SiC) 450 [4] 6.5×107
Tungsten carbide (WC) 450 – 650 [4] 6.5×1079.4×107
Osmium (Os) 525 - 562 [30] 7.61×1078.15×107
Single-walled carbon nanotube 1,000 + [31][32] 1.5×108 +
Graphene 1,050[33] 1.52×108
Diamond (C) 1,050 - 1210[34] 1.52×108 - 1.75×108
Carbyne (C)[35] 32,100[36] 4.66×109

See also


  1. ^ The Rational Mechanics of Flexible or Elastic Bodies, 1638–1788: Introduction to Leonhardi Euleri Opera Omnia, vol. X and XI, Seriei Secundae. Orell Fussli.
  2. ^ In computer graphics visual effects, the terms linear elastic material and rigid material are used interchangeably if the Young's modulus is high.
  3. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "Emodulus of elasticity (Young's modulus), ".
  4. ^ a b c d e f g h i j k l m n o p q r s t "Elastic Properties and Young Modulus for some Materials". The Engineering ToolBox. Retrieved 2012-01-06. 
  5. ^ "Overview of materials for Low Density Polyethylene (LDPE), Molded". Matweb. Retrieved Feb 7, 2013. 
  6. ^ Subhash G, Yao S, Bellinger B, Gretz MR. (2005). "Investigation of mechanical properties of diatom frustules using nanoindentation". J Nanosci Nanotechnol. 5 (1): 50–6.  
  7. ^ Ivanovska IL, de Pablo PJ, Sgalari G, MacKintosh FC, Carrascosa JL, Schmidt CF, Wuite GJL (2004). "Bacteriophage capsids: Tough nanoshells with complex elastic properties". Proc Nat Acad Sci USA. 101 (20): 7600–5.  
  8. ^ Material Properties Data: Medium Density Fiberboard (MDF)
  9. ^ Rho, JY (1993). "Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements". Journal of Biomechanics 26 (2): 111–119.  
  10. ^ Polyester Matrix Composite reinforced by glass fibers (Fiberglass). [SubsTech] (2008-05-17). Retrieved on 2011-03-30.
  11. ^ Kol, N.; et al. (June 8, 2005). "Self-Assembled Peptide Nanotubes Are Uniquely Rigid Bioinspired Supramolecular Structures". Nano Letters 5 (7): 1343–1346.  
  12. ^ Niu, L.; et al. (June 6, 2007). "Using the Bending Beam Model to Estimate the Elasticity of Diphenylalanine Nanotubes". Langmuir 23 (14): 7443–7446.  
  13. ^ E-G-nu.htm "Composites Design and Manufacture (BEng) – MATS 324" . 
  14. ^ Nabi Saheb, D.; Jog, JP. (1999). "Natural fibre polymer composites: a review". Advances in Polymer Technology 18 (4): 351–363.  
  15. ^ Bodros, E. (2002). "Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase". Composite Part A 33 (7): 939–948.  
  16. ^ A. P. Jackson,J. F. V. Vincent and R. M. Turner (1988). "The Mechanical Design of Nacre". Proceedings of the Royal Society B 234 (1277): 415–440.  
  17. ^ DuPont (2001). "Kevlar Technical Guide". p. 9. 
  18. ^ M. Staines, W. H. Robinson and J. A. A. Hood (1981). "Spherical indentation of tooth enamel". Journal of Materials Science 16 (9): 2551–2556.  
  19. ^ Bodros, E.; Baley, C. (15 May 2008). "Study of the tensile properties of stinging nettle fibres (Urtica dioica)". Materials Letters 62 (14): 2143–2145.  
  20. ^ Epoxy Matrix Composite reinforced by 70% carbon fibers [SubsTech]. (2006-11-06). Retrieved on 2011-03-30.
  21. ^ Physical properties of Silicon (Si). Ioffe Institute Database. Retrieved on 2011-05-27.
  22. ^ E.J. Boyd; et al. (February 2012). "Measurement of the Anisotropy of Young's Modulus in Single-Crystal Silicon". Journal of Microelectromechanical Systems 21 (1): 243–249.  
  23. ^ Chou, H. M.; Case, E. D. (November 1988). "Characterization of some mechanical properties of polycrystalline yttrium iron garnet (YIG) by non-destructive methods". Journal of Materials Science Letters 7 (11): 1217–1220.  
  24. ^ YIG properties
  25. ^ [3]
  26. ^ Adler-Abramovich, L.; et al. (December 17, 2010). "Self-Assembled Organic Nanostructures with Metallic-Like Stiffness". Angewandte Chemie International Edition 49 (51): 9939–9942.  
  27. ^ Foley, James C.; et al. (2010). "An Overview of Current Research and Industrial Practices of Be Powder Metallurgy". In Marquis, Fernand D.S. Powder Materials: Current Research and Industrial Practices III. Hoboken, NJ, USA: John Wiley & Sons, Inc. p. 263.  
  28. ^ . webelements Retrieved Jan 27, 2015. 
  29. ^ (PDF). Glemco Retrieved Jan 27, 2014. 
  30. ^ D.K.Pandey; Singh, D.; Yadawa, P.K.; et al. (2009). "Ultrasonic Study of Osmium and Ruthenium" (PDF). Platinum Metals Rev. 53 (4): 91–97.  
  31. ^ L. Forro; et al. "Electronic and mechanical properties of carbon nanotubes" (PDF). 
  32. ^ Y.H.Yang; Li, W. Z.; et al. (2011). "Radial elasticity of single-walled carbon nanotube measured by atomic force microscopy". Applied Physics Letters 98 (4): 041901.  
  33. ^ Fang Liu, Pingbing Ming, and Ju Li. "Ab initio calculation of ideal strength and phonon instability of graphene under tension" (PDF). 
  34. ^ Spear and Dismukes (1994). Synthetic Diamond – Emerging CVD Science and Technology. Wiley, NY. p. 315.  
  35. ^ Owano, Nancy (Aug 20, 2013). "Carbyne is stronger than any known material". 
  36. ^ Mingjie Liu, Vasilii I. Artyukhov, Hoonkyung Lee, Fangbo Xu and Boris I. Yakobson (Dec 2, 2013). "Carbyne From First Principles: Chain of C Atoms, a Nanorod or a Nanorope?" (PDF). 

Further reading

  • ASTM E 111, "Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus," [4]
  • The ASM Handbook (various volumes) contains Young's Modulus for various materials and information on calculations. Online version (subscription required)

External links

  • Matweb: free database of engineering properties for over 63,000 materials
  • Young's Modulus for groups of materials, and their cost
Conversion formulas
Homogeneous isotropic linear elastic materials have their elastic properties uniquely determined by any two moduli among these; thus, given any two, any other of the elastic moduli can be calculated according to these formulas.
K=\, E=\, \lambda=\, G=\, \nu=\, M=\, Notes
(K,\,E) K E \tfrac{3K(3K-E)}{9K-E} \tfrac{3KE}{9K-E} \tfrac{3K-E}{6K} \tfrac{3K(3K+E)}{9K-E}
(K,\,\lambda) K \tfrac{9K(K-\lambda)}{3K-\lambda} \lambda \tfrac{3(K-\lambda)}{2} \tfrac{\lambda}{3K-\lambda} 3K-2\lambda\,
(K,\,G) K \tfrac{9KG}{3K+G} K-\tfrac{2G}{3} G \tfrac{3K-2G}{2(3K+G)} K+\tfrac{4G}{3}
(K,\,\nu) K 3K(1-2\nu)\, \tfrac{3K\nu}{1+\nu} \tfrac{3K(1-2\nu)}{2(1+\nu)} \nu \tfrac{3K(1-\nu)}{1+\nu}
(K,\,M) K \tfrac{9K(M-K)}{3K+M} \tfrac{3K-M}{2} \tfrac{3(M-K)}{4} \tfrac{3K-M}{3K+M} M
(E,\,\lambda) \tfrac{E + 3\lambda + R}{6} E \lambda \tfrac{E-3\lambda+R}{4} \tfrac{2\lambda}{E+\lambda+R} \tfrac{E-\lambda+R}{2} R=\sqrt{E^2+9\lambda^2 + 2E\lambda}
(E,\,G) \tfrac{EG}{3(3G-E)} E \tfrac{G(E-2G)}{3G-E} G \tfrac{E}{2G}-1 \tfrac{G(4G-E)}{3G-E}
(E,\,\nu) \tfrac{E}{3(1-2\nu)} E \tfrac{E\nu}{(1+\nu)(1-2\nu)} \tfrac{E}{2(1+\nu)} \nu \tfrac{E(1-\nu)}{(1+\nu)(1-2\nu)}
(E,\,M) \tfrac{3M-E+S}{6} E \tfrac{M-E+S}{4} \tfrac{3M+E-S}{8} \tfrac{E-M+S}{4M} M

There are two valid solutions.
The plus sign leads to \nu\geq 0.
The minus sign leads to \nu\leq 0.

(\lambda,\,G) \lambda+ \tfrac{2G}{3} \tfrac{G(3\lambda + 2G)}{\lambda + G} \lambda G \tfrac{\lambda}{2(\lambda + G)} \lambda+2G\,
(\lambda,\,\nu) \tfrac{\lambda(1+\nu)}{3\nu} \tfrac{\lambda(1+\nu)(1-2\nu)}{\nu} \lambda \tfrac{\lambda(1-2\nu)}{2\nu} \nu \tfrac{\lambda(1-\nu)}{\nu} Cannot be used when \nu=0 \Leftrightarrow \lambda=0
(\lambda,\,M) \tfrac{M + 2\lambda}{3} \tfrac{(M-\lambda)(M+2\lambda)}{M+\lambda} \lambda \tfrac{M-\lambda}{2} \tfrac{\lambda}{M+\lambda} M
(G,\,\nu) \tfrac{2G(1+\nu)}{3(1-2\nu)} 2G(1+\nu)\, \tfrac{2 G \nu}{1-2\nu} G \nu \tfrac{2G(1-\nu)}{1-2\nu}
(G,\,M) M - \tfrac{4G}{3} \tfrac{G(3M-4G)}{M-G} M - 2G\, G \tfrac{M - 2G}{2M - 2G} M
(\nu,\,M) \tfrac{M(1+\nu)}{3(1-\nu)} \tfrac{M(1+\nu)(1-2\nu)}{1-\nu} \tfrac{M \nu}{1-\nu} \tfrac{M(1-2\nu)}{2(1-\nu)} \nu M
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.