World Library  
  
Flag as Inappropriate
Email this Article

Zinc–cerium battery

Article Id: WHEBN0031245673
Reproduction Date:

Title: Zinc–cerium battery  
Author: World Heritage Encyclopedia
Language: English
Subject: Cerium, List of battery types, Rechargeable battery, Nickel–lithium battery, Trough battery
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Zinc–cerium battery

Diagram of the divided zinc–cerium redox flow battery

Zinc–cerium batteries are a type of redox flow battery first developed by Plurion Inc. (UK) during the 2000s.[1][2] In this rechargeable battery, both negative zinc and positive cerium electrolytes are circulated though an electrochemical flow reactor during the operation and stored in two separated reservoirs. Negative and positive electrolyte compartments in the electrochemical reactor are separated by a cation-exchange membrane, usually Nafion (DuPont). The Ce(III)/Ce(IV) and Zn(II)/Zn redox reactions take place at the positive and negative electrodes, respectively. Since zinc is electroplated during charge at the negative electrode this system is classified as a hybrid flow battery. Unlike in zinc–bromine and zinc–chlorine redox flow batteries, no condensation device is needed to dissolve halogen gases. The reagents used in the zinc-cerium system are considerably less expensive than those used in the vanadium flow battery.

Due to the high standard electrode potentials of both zinc and cerium redox reactions in aqueous media, the open-circuit cell voltage is as high as 2.43 V.[1] Among the other proposed flow battery systems, this system has the largest cell voltage and power density per electrode area.[3] Methanesulfonic acid is used as supporting electrolyte, as it allows high concentrations of both zinc and cerium; the solubility of the corresponding methanesulfonates is 2.1 M for Zn,[4] 2.4 M for Ce(III) and up to 1.0 M for Ce(IV).[5] Methanesulfonic acid is particularly well suited for industrial electrochemical applications and is considered to be a green alternative to other support electrolytes.[4] The Zn-Ce system has introduced the use of this acid to other flow batteries as a better alternative to sulphuric acid.

Cell chemistry

At the negative electrode (anode), zinc is electroplated and stripped on the carbon polymer electrodes during charge and discharge, respectively.[6][7][8]

Zn2+(aq) + 2e− ↔ Zn(s) (−0.76 V vs. SHE)

At the positive electrode (cathode) (titanium based materials or carbon felt electrode), Ce(III) oxidation and Ce(IV) reduction take place during charge and discharge, respectively.[9][10]

Ce3+(aq) − e− ↔ Ce4+(aq) (ca. +1.44 V vs. SHE)

Because of the large cell voltage, hydrogen (0 V vs. SHE) and oxygen (+1.23 V vs. SHE) could evolve theoretically as side reactions during battery operation (especially on charging).[11] The positive electrolyte is a solution of cerium(III) methanesulfonate.

History and development

The zinc–cerium redox flow battery was first proposed by Clarke and co-workers in 2004,[1][2] which has been the core technology of Plurion Inc. (UK). In 2008, Plurion Inc. suffered a liquidity crisis and was under liquidation in 2010. However, the information of the experimental conditions and charge-discharge performance described in the early patents of Plurion Inc. are limited. Since the 2010s, the electrochemical properties and the characterisation of a zinc–cerium redox flow battery have been identified by the researchers of Southampton and Strathclyde Universities. During charge/discharge cycles at 50 mA cm−2, the coulombic and voltage efficiencies of the zinc–cerium redox flow battery were reported to be 92 and 68%, respectively.[12] In 2011, a membraneless (undivided) zinc–cerium system based on low acid concentration electrolyte using compressed pieces of carbon felt positive electrode was proposed. Discharge cell voltage and energy efficiency were reported to be approximately 2.1 V and 75%, respectively. With such undivided configuration (single electrolyte compartment), self-discharge was relatively slow at low concentrations of cerium and acid.[13][14] Major installation of the zinc–cerium redox flow battery was the > 2 kW testing facility in Glenrothes, Scotland, installed by Plurion Inc. The use of mixed acid electrolytes for the positive half-cell has been investigated as a mean to increase the kinetics of the cerium redox reaction in State Key Laboratory of Rare Earth Resource Utilization and the Jiangxi University of Science and Technology, China.[15][16] Platinum-iridium coatings have shown the best performance as positive electrodes for the battery, while being less expensive than platinum electrodes.[17] Research on mixed acids continues and it has been shown that low concentrations of hydrochloric acid can improve the electrochemical response of the cerium reaction, while nitric acid additions had negative results.[18] Hierarchical porous carbon as the positive electrode has yielded better performance than carbon felt in laboratory scale experiments.[19]

See also

References

  1. ^ a b c R.L. Clarke, B.J. Dougherty, S. Harrison, P.J. Millington, S. Mohanta, US 2004/ 0202925 A1, Cerium Batteries, (2004).
  2. ^ a b R.L. Clarke, B.J. Dougherty, S. Harrison, J.P. Millington, S. Mohanta, US 2006/0063065 A1, Battery with bifunctional electrolyte, (2005).
  3. ^ Leung, P.K.; Ponce de León, C.; Low, C.J.T.; Walsh, F.C. (2011). "Ce(III)/Ce(IV) in methanesulfonic acid as the positive half cell of a redox flow battery". Electrochimica Acta 56: 2145–2153.  
  4. ^ a b Gernon, M. D.; Wu, M.; Buszta, T.; Janney, P. (1999). "Environmental benefits of methanesulfonic acid: comparative properties and advantages". Green Chemistry 1 (3): 127–140.  
  5. ^ Kreh, R.P.; Spotnitz, R.M.; Lundquist, J.T. (1989). "Mediated electrochemical synthesis of aromatic aldehydes, ketones, and quinones using ceric methanesulfonate". The Journal of Organic Chemistry 54 (7): 1526–1531.  
  6. ^ Nikiforidis, G.; Berlouis, L.; Hall, D.; Hodgson, D. (2012). "Evaluation of carbon composite materials for the negative electrode in the zinc–cerium redox flow cell". Journal of Power Sources 206: 497–503.  
  7. ^ Nikiforidis, G.; Berlouis, L.; Hall, D.; Hodgson, D. (2013). "A study of different carbon composite materials for the negative half-cell reaction of the zinc cerium hybrid redox flow cell". Electrochimica Acta 113: 412–423.  
  8. ^ Leung, P.K.; Ponce de León, C.; Low, C.T.J.; Walsh, F.C. (2011). "Zinc deposition and dissolution in methanesulfonic acid onto a carbon composite electrode as the negative electrode reactions in a hybrid redox flow battery". Electrochimica Acta 56: 6536–6546.  
  9. ^ Xie, Z.; Zhou, D.; Xiong, F.; Zhang, S.; Huang, K. (2011). "Cerium-zinc redox flow battery: Positive half-cell electrolyte studies". Journal of Rare Earths 29 (6): 567–573.  
  10. ^ Nikiforidis, G.; Berlouis, L.; Hall, D.; Hodgson, D. (2014). "Charge/discharge cycles on Pt and Pt-Ir based electrodes for the positive side of the Zinc-Cerium hybrid redox flow battery". Electrochimica Acta 125: 176–182.  
  11. ^ Nikiforidis, G.; Berlouis, L.; Hall, D.; Hodgson, D. (2013). "Impact of electrolyte composition on the performance of the zincecerium redox flow battery system". Journal of Power Sources 243: 691–698.  
  12. ^ Leung, P.K.; Ponce de León, C.; Low, C.T.J.; Shah, A.A.; Walsh, F.C. (2011). "Characterization of a zinc-cerium flow battery". Journal of Power Sources 196 (11): 5174–5185.  
  13. ^ Leung P.K.; Ponce-de-Leon C.; Walsh F.C. (2011). "An undivided zinc–cerium redox flow battery operating at room temperature (295 K)". Electrochemistry Communications 13 770–773. doi:10.1016/j.elecom.2011.04.011
  14. ^ Leung, P.K.; Ponce de León, C.; Walsh, F.C. (2012). "The influence of operational parameters on the performance of an undivided zinc–cerium flow battery". Electrochimica Acta 80: 7–14.  
  15. ^ Xie, Z.; Xiong, F.; Zhou, D. (2011). "Study of the Ce3+/Ce4+ redox couple in mixed-acid media (CH3SO3H and H2SO4) for redox flow battery application". Energy and Fuels 25 (5): 2399–2404.  
  16. ^ Xie, Z.; Liu, Q.; Chang, Z.; Zhang, X. (2013). "The developments and challenges of cerium half-cell in zinc–cerium redox flow battery for energy storage". Electrochimica Acta 90: 695–704.  
  17. ^ Nikiforidis, G.; Berlouis, L.; Hall, D.; Hodgson, D. (2014). "An electrochemical study on the positive electrode side of the zinc–cerium hybrid redox flow battery". Electrochimica Acta 115: 621–629.  
  18. ^ Nikiforidis, G.; Daoud, W.A. (2014). "Effect of mixed acid media on the positive side of the hybrid zinc-cerium redox flow battery". Electrochimica Acta 141: 255–262.  
  19. ^ Xie, Z.; Yang, B.; Cai, D.; Yang, L. (2014). "Hierarchical porous carbon toward effective cathode in advanced zinc-cerium redox flow battery". Journal of Rare Earths 32 (10): 973–978.  

External links

  • [1] University of Southampton Research Project: Zinc-cerium redox flow cells batteries
  • [2] U.S. Department of Energy's Flow Cells for Energy Storage Workshop
Types
Galvanic cell
Cell parts
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.