World Library  


Add to Book Shelf
Flag as Inappropriate
Email this Book

Adiabatic Circuits: Converter for Static Cmos Signals : Volume 1, Issue 9 (05/05/2003)

By Fischer, J.

Click here to view

Book Id: WPLBN0004002648
Format Type: PDF Article :
File Size: Pages 5
Reproduction Date: 2015

Title: Adiabatic Circuits: Converter for Static Cmos Signals : Volume 1, Issue 9 (05/05/2003)  
Author: Fischer, J.
Volume: Vol. 1, Issue 9
Language: English
Subject: Science, Advances, Radio
Collections: Periodicals: Journal and Magazine Collection, Copernicus GmbH
Historic
Publication Date:
2003
Publisher: Copernicus Gmbh, Göttingen, Germany
Member Page: Copernicus Publications

Citation

APA MLA Chicago

Fischer, J., Amirante, E., Bargagli-Stoffi, A., & Schmitt-Landsiedel, D. (2003). Adiabatic Circuits: Converter for Static Cmos Signals : Volume 1, Issue 9 (05/05/2003). Retrieved from http://www.ebooklibrary.org/


Description
Description: Institute for Technical Electronics, Technical University Munich, Theresienstrasse 90, D-80290 Munich, Germany. Ultra low power applications can take great advantages from adiabatic circuitry. In this technique a multiphase system is used which consists ideally of trapezoidal voltage signals. The input signals to be processed will often come from a function block realized in static CMOS. The static rectangular signals must be converted for the oscillating multiphase system of the adiabatic circuitry. This work shows how to convert the input signals to the proposed pulse form which is synchronized to the appropriate supply voltage.

By means of adder structures designed for a 0.13µm technology in a 4-phase system there will be demonstrated, which additional circuits are necessary for the conversion. It must be taken into account whether the data arrive in parallel or serial form. Parallel data are all in one phase and therefore it is advantageous to use an adder structure with a proper input stage, e.g. a Carry Lookahead Adder (CLA). With a serial input stage it is possible to read and to process four signals during one cycle due to the adiabatic 4-phase system. Therefore input signals with a frequency four times higher than the adiabatic clock frequency can be used. This reduces the disadvantage of the slow clock period typical for adiabatic circuits. By means of an 8 bit Ripple Carry Adder (8 bit RCA) the serial reading will be introduced. If the word width is larger than 4 bits the word can be divided in 4 bit words which are processed in parallel. This is the most efficient way to minimize the number of input lines and pads. At the same time a high throughput is achieved.

Summary
Adiabatic circuits: converter for static CMOS signals

 

Click To View

Additional Books


  • Objektverfolgung Bei Einer Vollständigen... (by )
  • A Fully Probe Corrected Near-field Far-f... (by )
  • Comparison of Linear and Logarithmic Rec... (by )
  • Some Anomalies of Mesosphere/Lower Therm... (by )
  • Radiation Pattern Analysis of Antenna Sy... (by )
  • Downlink Beamforming Concepts in Utra Fd... (by )
  • Remote Sensing and Modeling of Lightning... (by )
  • Simultaneous Large-scale Reliability Ana... (by )
  • Highly Efficient Integrated Rectifier an... (by )
  • Considerations on Radar Localization in ... (by )
  • Measurement Procedures for Characterizat... (by )
  • Large Scale Integrated Hydrological Mode... (by )
Scroll Left
Scroll Right

 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.